The following photos are from a Victorian tiled hallway floor at a residence in Kettering Northants which had been covered with carpet for the last thirty odd years; to make matters worse the carpet had been stuck down with adhesive which was proving very difficult to remove.
The customer phoned to see if it would be possible to restore the floor back to its former glory as it was very dirty and the colours were dull not to mention the glue. After a home visit and testing a small area to prove we could do the work, the customer booked us in to carry out the service before completing the decorating of the hallway. It’s always a good idea to have any heavy restoration work done before you decorate as heavy machinery is used and it can be a messy job.
Cleaning Victorian Tiles
To remove the glue and restore the tiles Tile Doctor Remove and Go was left to soak into the tile before being brushed in with a rotary machine fitted with a black scrubbing pad. This process also works to lift out the embedded dirt from the floor tile; once done the soiled solution was removed using a wet vacuum and the floor rinsed with clean water to remove the product from the tile.
To get the grout clean Tile Doctor Grout Clean-up was sprayed onto all the grout lines and then hand scrubbed in with stiff brushes; this was then followed by a second wash and rinse.
The hallway was still in general use so the floors were then sheeted up for three days to protect them whilst the floor tiles and grout were allowed to dry out assisted by a dehumidifier which we left on site.
Sealing Victorian Tiles
On our return we remove the sheeting and damp tested the tiles to make sure they had dried sufficiently; all was well so we sealed the floor by applying five coats of Tile Doctor High Shine as the customer had requested a high gloss finish in order to fully bring out the colours of the tiles.
I think you will agree from the photographs we have managed to achieve this, certainly the customer was very happy with the results.