Honed Limestone Floor Renovated in Ecton

I was contacted by the owner of a property in the picturesque village of Ecton who was concerned that her Limestone floor spanning the kitchen and open plan breakfast area was starting to lose its natural appeal and was finding it harder to clean and maintain.

Limestone Tiled Dining Room Floor Before Renovation Ecton

I went over to take a closer look at the floor and carry out a survey. In order determine the best cleaning method I conducted a test on a small area of the floor. This gives the clients confidence in my abilities and a good idea of what result we they can expect. The Limestone was honed smooth but was not polished and the customers were keen not to add too much of an unnatural shine to the floor. The grout lines in some of the more heavily used areas, such as by the sink, were also discoloured and would require a decent scrub with an appropriate cleaning product.

I spoke to the clients about options for the finish to be applied after cleaning and they decided that they wanted to keep the tiles as light as possible with a slight shine. With the clients impressed with the test area I prepared I went away and produced a detailed quote which was e mailed to them along with our general T&Cs and the work was booked in to be completed shortly after.

Limestone Tiled Kitchen Floor Before Renovation Ecton

Cleaning a Limestone Tiled Floor

The floor covered quite a large area, some 38m2, and had some larger items of furniture that needed to be moved before starting. The first task was to scrub the grout lines with a specialist grout brush, designed to work the product into the grout. Limestone is an acid-sensitive stone, so a strong alkaline cleaner was required. I used Tile Doctor Pro-Clean mixed with warm water at a ratio of 3:1 which was left to dwell for around twenty minutes.

The area was then rinsed with water and the soil extracted before applying a series of diamond impregnated burnishing pads attached to a rotary scrubbing machine, ranging from a coarse 400 grit (200 in some of the more stubborn areas), a medium 800-grit and finishing with a fine 1500 grit to clean the stone. The whole area was then rinsed again and extracted using a wet pick up vacuum. The floor was then left to dry overnight.

Sealing a Limestone Tiled Floor

The following day a very fine 3000 grit diamond pad was used to ‘spray burnish’ the floor which uses very little water and ensures that any remaining residues are lifted as well as finishing the floor in the highest level of mechanical polishing possible prior to sealing.

If the clients desired a higher level of shine a powdered high shine sealer would have been worked into the tiles to achieve a highly reflective surface, however the mechanical polish was the highest level of shine wanted.

My client requested a completely natural finish so to seal the stone after cleaning I applied an impregnating sealer called Tile Doctor Ultra Seal. Impregnating sealers soak into the pores of the tile protecting them from within and Ultra-Seal doesn’t alter the appearance of the floor and so maintained the natural appearance of the stone keeping it as light as possible.

Limestone Tiled Kitchen Floor After Renovation Ecton

Aftercare instructions along with a bottle of suitable pH Neutral Tile Cleaner were supplied.
The customer was thrilled with the result and was surprised at the transformation of the floor, they even left the following feedback on the Tile Doctor website.

“Thank you so much Phil for a professional service resulting in my floor looking just as I wanted it too. You were attentive to all detail. I would strongly recommend Phil as a trustworthy, honest person to anyone who is considering work done. See you again in the Summer Phil to clean my patio. Natalie W, Northampton”

Limestone Tiled Dining Room Floor After Renovation Ecton

 

Cleaning and Sealing a Limestone Tiled Floor in Northamptonshire

Renovating a Black Limestone Patio in Walgrave

The following photos show a large black limestone patio that had been installed at a house in the village of Walgrave by a local builder who had sealed the stone before cleaning it first. Doing so trapped the dirt and grout smears (ka grout haze) underneath the sealer which resulted in a hazy appearance that could never be cleaned off.

Black Limestone Patio Before Cleaning Walgrave

Spring is an ideal time to work on patios which tend to get stained most from leaves and other detritus during the windy autumn and then ravaged by the winter frosts. If you want to seal the stone though its best to wait until a spell of continuous hot weather for the best results.

Black Limestone Patio Before Cleaning Walgrave

Cleaning a Black Limestone Patio

To clean the stone, I would first need to remove the builder’s sealer, so I started by applying Tile Doctor Remove & Go which is a strong product designed to safely remove coatings such as sealers and paint from stone and tile. A strong dilution of Remove and Go was applied to the floor and left to soak in for about ten minutes before being worked into the Limestone using a black scrubbing pad fitted to a rotary floor scrubbing machine. The soiled cleaning solution was then rinsed off the patio with water and extracted using a wet vacuum.

Black Limestone Patio During Cleaning Walgrave

With the sealer removed along with the dirt then next task was to tackle the smears of grout that had been left on the surface of the stone. To do this I applied a specially developed product called Tile Doctor Acid Gel which is left to dwell on the surface of the stone just long enough to weaken the unwanted grout which can be then scrubbed off. The solution is then rinsed off the patio and extracted as before. This process was done in sections worked across the length of the patio and then when finished it was given a through rinse.

Sealing a Black Limestone Patio

I would need the limestone patio to be dry before sealing so I left it fully dry out over the course of a few days before coming back to finish off, fortunately the weather was good, and it wasn’t long before I returned.

Black Limestone Patio During Sealing Walgrave

My sealer of choice for Black Limestone is Tile Doctor Colour Grow, it’s an impregnating sealer the penetrates the pores of the stone protecting it from within and simultaneously enhancing the natural colours in the stone. This product is also fully breathable which makes it ideal for external use or damp areas where moisture needs to rise through the stone and evaporate. Two coats of Colour Grow were all that was required to fully seal the stone.

Black Limestone Patio After Cleaning Walgrave

The work was a huge improvement to the look of the patio which is now vibrant, inviting and fully transformed by the process.

Black Limestone Patio After Cleaning Walgrave

 

Limestone Patio Maintenance in Northamptonshire