12-Year-Old Limestone Floor Renovation in Yelvertoft

I was called in to look at this Limestone tiled kitchen and hallway floor that had been installed 12 years prior at a small cottage in Yelvertoft. Yelvertoft is a small village with a population of less than a 1000 people near Daventry, with the Grand Union Canal passing close by.

I always like to do a site visit to survey the floor before recommending a solution, photographs help but you can never be certain until you have had chance to run some tests and discussed the history of the floor with the owner. As it turns out the stone had not been professionally cleaned and sealed since it was installed and was now in a bad state. So much so that my client was concerned it was beyond restoration and had considered replacing the floor.

Limestone Kitchen Floor Before Renovation Yelvertoft

I carried out a cleaning test on a small area and although it was very badly soiled, I found the Limestone responded well to our cleaning processes. The client was quite surprised as they had almost given up on it! We discussed the process involved, which would take two days and worked out a cost for the works. Confident I would do the job well my quote was accepted, and a date set for my return.

Limestone Kitchen Floor Before Renovation Yelvertoft

Cleaning a Limestone Tiled Kitchen and Hallway Floor

Arriving on the first day, we noted that there was a fairly new oak stairway and beam that had been fitted. I protected these and the kitchen units with a protective wrap to prevent any splashes from the cleaning process.

To restore the appearance of the Limestone I started with the application of a set of Tile Doctor Burnishing pads beginning with a very coarse 200-grit pad instead of the usual 400-grit. I reasoned that with the Stone being in such bad condition it could benefit from the coarser pad which gives a very deep clean, removing light and medium scratches by resurfacing the top of the tile. The pads are applied with water to lubricate and the fine slurry generated is rinsed off afterwards with more water and then extracted with a wet vacuum. After applying the 200-grit pad this process is repeated with increasingly higher grit pads to further hone the stone and eventually finishing with a very fine 3000 grit pad to achieve a polished finish.

Once I was satisfied with the Limestone tiles a strong dilution of Tile Doctor Pro-Clean and Grout Clean-Up was used to remove the stubborn staining from the grout lines. The floor was given a final rinse and extraction and you could see a huge improvement in the floor which looked lighter and much cleaner.

Sealing a Limestone Tiled Kitchen and Hallway Floor

I allowed the floors to dry off overnight and returned the next day to apply a sealer first checking for moisture with a damp meter to ensure the floor was dry and ready for sealing.

To seal the Limestone, I chose Tile Doctor Ultra Seal Sealant which is a no-sheen, natural-look, penetrating sealer that is formulated to provide maximum stain protection, especially in food preparation areas like the kitchen. It is also an excellent grout sealer, but mainly it gives a lovely natural finish allowing the variations in the natural Limestone to shine through.

Limestone Kitchen Floor After Renovation Yelvertoft

The pictures and clients’ testimonial really do speak for themselves; I was really pleased that she was so satisfied with the result and had saved a fortune in relaying the floor.

“I was about to replace my Limestone 12 year old floor … then Phil the Tile Doctor worked his magic… I now have a good as new lovely floor, I am absolutely delighted. Thanks, so much Phil.” Louise O, Yelvertoft

Limestone Kitchen Floor After Renovation Yelvertoft

 

Limestone Tiled Floor Professionally Cleaned and Polished in Northamptonshire

Honed Limestone Floor Renovated in Ecton

I was contacted by the owner of a property in the picturesque village of Ecton who was concerned that her Limestone floor spanning the kitchen and open plan breakfast area was starting to lose its natural appeal and was finding it harder to clean and maintain.

Limestone Tiled Dining Room Floor Before Renovation Ecton

I went over to take a closer look at the floor and carry out a survey. In order determine the best cleaning method I conducted a test on a small area of the floor. This gives the clients confidence in my abilities and a good idea of what result we they can expect. The Limestone was honed smooth but was not polished and the customers were keen not to add too much of an unnatural shine to the floor. The grout lines in some of the more heavily used areas, such as by the sink, were also discoloured and would require a decent scrub with an appropriate cleaning product.

I spoke to the clients about options for the finish to be applied after cleaning and they decided that they wanted to keep the tiles as light as possible with a slight shine. With the clients impressed with the test area I prepared I went away and produced a detailed quote which was e mailed to them along with our general T&Cs and the work was booked in to be completed shortly after.

Limestone Tiled Kitchen Floor Before Renovation Ecton

Cleaning a Limestone Tiled Floor

The floor covered quite a large area, some 38m2, and had some larger items of furniture that needed to be moved before starting. The first task was to scrub the grout lines with a specialist grout brush, designed to work the product into the grout. Limestone is an acid-sensitive stone, so a strong alkaline cleaner was required. I used Tile Doctor Pro-Clean mixed with warm water at a ratio of 3:1 which was left to dwell for around twenty minutes.

The area was then rinsed with water and the soil extracted before applying a series of diamond impregnated burnishing pads attached to a rotary scrubbing machine, ranging from a coarse 400 grit (200 in some of the more stubborn areas), a medium 800-grit and finishing with a fine 1500 grit to clean the stone. The whole area was then rinsed again and extracted using a wet pick up vacuum. The floor was then left to dry overnight.

Sealing a Limestone Tiled Floor

The following day a very fine 3000 grit diamond pad was used to ‘spray burnish’ the floor which uses very little water and ensures that any remaining residues are lifted as well as finishing the floor in the highest level of mechanical polishing possible prior to sealing.

If the clients desired a higher level of shine a powdered high shine sealer would have been worked into the tiles to achieve a highly reflective surface, however the mechanical polish was the highest level of shine wanted.

My client requested a completely natural finish so to seal the stone after cleaning I applied an impregnating sealer called Tile Doctor Ultra Seal. Impregnating sealers soak into the pores of the tile protecting them from within and Ultra-Seal doesn’t alter the appearance of the floor and so maintained the natural appearance of the stone keeping it as light as possible.

Limestone Tiled Kitchen Floor After Renovation Ecton

Aftercare instructions along with a bottle of suitable pH Neutral Tile Cleaner were supplied.
The customer was thrilled with the result and was surprised at the transformation of the floor, they even left the following feedback on the Tile Doctor website.

“Thank you so much Phil for a professional service resulting in my floor looking just as I wanted it too. You were attentive to all detail. I would strongly recommend Phil as a trustworthy, honest person to anyone who is considering work done. See you again in the Summer Phil to clean my patio. Natalie W, Northampton”

Limestone Tiled Dining Room Floor After Renovation Ecton

 

Cleaning and Sealing a Limestone Tiled Floor in Northamptonshire

Limestone Tiled Floor with Grout Haze Cleaned in Clipston

These photos are of a Limestone tiled floor which was installed in the Kitchen of a property in the small parish of Clipston, which is close to the towns of Market Harborough and Daventry, approximately three years ago. The customer was never very happy with it since it was laid as it never seemed to look clean asked me to cover over and work out what could be done.

On my initial visit I soon realised that the installer had not cleaned off all the grout from the tiles before applying the sealer. This effectively trapped the grout under the sealer and gave the whole floor a dirty appearance, this explained the problem the customer was frustrated with as she could never ever seem to get the floor looking clean.

Limestone Floor With Grout Haze Before Cleaning Clipston
This issue is known as Grout Haze or Grout Smears and is a problem we often come across where the floor has been laid without the excess grout residue being completely polished off the tiles after the grouting. Some manufacturers recommend the tiles are sealed before grouting to make it easier to polish the grout off later. After discussing how we could remedy this I issued a quote which the customer accepted, and we scheduled the work to be done.

Limestone Floor With Grout Haze Before Cleaning Clipston

Removing Grout Haze from Limestone Kitchen Tiles

I arrived on site on the arranged date, as it was a painted kitchen it was not possible to mask up the units, so I used a small hand-held polishing machine fitted with a six inch 400-grit burnishing pad to carefully clean around the edges and break through the sealant. This process was then repeated with a larger seventeen inch 400-grit burnishing pad fitted to a floor polishing machine throughout the rest of the area.

Once the original sealant had been removed using the burnishing pad the next step was to remove the Grout Haze by given the floor an acid wash with Tile Doctor Acid Gel. Being a gel, this product is easier to control than a liquid and sits on the surface where it’s needed to break down the unsightly Grout Haze. It’s left to dwell for a short period before being worked in with a special brush that is designed for this purpose. The resulting slurry is then removed with a professional wet pick up machine and the floor given a rinse with water to remove any trace of the product.

After treating the Grout Haze my next step was to refine the surface of the Limestone using a medium 800-grit and fine 1500-grit diamond encrusted burnishing pad which are applied with water and restore the polished appearance of the stone. The floor is rinsed with more water between the application of each pad to remove the slurry that is generated and then dried with the wet pickup machine.

Sealing a Limestone Tiled Kitchen Floor

I returned the following day to buff the tiles with a white polishing pad as the customer didn’t want a high shine finish which is normally achieved with the 3000-grit diamond burnishing pad, this gave a low sheen honed look as the customer had requested. The floor was then sealed with two coats of Tile Doctor Ultra-Seal which is a natural look sealer that and will protect the newly restored and polished tiles going forward.

Limestone Floor With Grout Haze After Cleaning Clipston
The customer was very happy with the results and has left the following positive feedback on our website.

‘Professional, floor looks much better’ – Vicki S, Clipston

I gave the customer some tips on maintenance and a complimentary bottle of Tile Doctor Stone Soap to enable her to keep the floor looking its best, this product is designed for the regular cleaning of polished stone floors and is pH neutral, so it won’t prematurely degrade the sealer.

Limestone Floor With Grout Haze After Cleaning Clipston
 

Professional Restoration of a Limestone Tiled Kitchen Floor in Northamptonshire

Renovating a Black Limestone Patio in Walgrave

The following photos show a large black limestone patio that had been installed at a house in the village of Walgrave by a local builder who had sealed the stone before cleaning it first. Doing so trapped the dirt and grout smears (ka grout haze) underneath the sealer which resulted in a hazy appearance that could never be cleaned off.

Black Limestone Patio Before Cleaning Walgrave

Spring is an ideal time to work on patios which tend to get stained most from leaves and other detritus during the windy autumn and then ravaged by the winter frosts. If you want to seal the stone though its best to wait until a spell of continuous hot weather for the best results.

Black Limestone Patio Before Cleaning Walgrave

Cleaning a Black Limestone Patio

To clean the stone, I would first need to remove the builder’s sealer, so I started by applying Tile Doctor Remove & Go which is a strong product designed to safely remove coatings such as sealers and paint from stone and tile. A strong dilution of Remove and Go was applied to the floor and left to soak in for about ten minutes before being worked into the Limestone using a black scrubbing pad fitted to a rotary floor scrubbing machine. The soiled cleaning solution was then rinsed off the patio with water and extracted using a wet vacuum.

Black Limestone Patio During Cleaning Walgrave

With the sealer removed along with the dirt then next task was to tackle the smears of grout that had been left on the surface of the stone. To do this I applied a specially developed product called Tile Doctor Acid Gel which is left to dwell on the surface of the stone just long enough to weaken the unwanted grout which can be then scrubbed off. The solution is then rinsed off the patio and extracted as before. This process was done in sections worked across the length of the patio and then when finished it was given a through rinse.

Sealing a Black Limestone Patio

I would need the limestone patio to be dry before sealing so I left it fully dry out over the course of a few days before coming back to finish off, fortunately the weather was good, and it wasn’t long before I returned.

Black Limestone Patio During Sealing Walgrave

My sealer of choice for Black Limestone is Tile Doctor Colour Grow, it’s an impregnating sealer the penetrates the pores of the stone protecting it from within and simultaneously enhancing the natural colours in the stone. This product is also fully breathable which makes it ideal for external use or damp areas where moisture needs to rise through the stone and evaporate. Two coats of Colour Grow were all that was required to fully seal the stone.

Black Limestone Patio After Cleaning Walgrave

The work was a huge improvement to the look of the patio which is now vibrant, inviting and fully transformed by the process.

Black Limestone Patio After Cleaning Walgrave

 

Limestone Patio Maintenance in Northamptonshire

Honed Limestone Kitchen Floor Restoration – Upper Boddington, Daventry

The following photos show a recent job we undertook at a timber framed house in the village of Upper Boddington, just south of Daventry. The client was having a new kitchen installed but didn’t want to replace the floor as it was generally in good condition, just dull with some staining and general wear and tear.

As the photos show the kitchen units had already been removed and as the tiles were wall to wall this was an ideal time to have this work carried out as the kitchen was being reconfigured and the customer wanted the floor to look uniform throughout, we also included the hallway in the cleaning process.

Honed Limestone Floor Before Restoration Upper Boddington

Burnishing and Cleaning Polished Limestone Tiles

With tiles made of Limestone, Travertine, Marble and other high quality polished stone, we find that the best way to restore appearance is through a process known as burnishing and in the before photo you will see the specialised grinding and polishing equipment we use to achieve brilliant results and a professional finish.

Honed Limestone Floor Before Restoration Upper Boddington

As the tiles were worn and stained in the high traffic areas we applied Tile Doctor Pro-Clean which had been diluted and decanted into a pump-up sprayer. After leaving it to soak in for ten minutes it was scrubbed into the tile and grout using a rotary floor machine and a stiff brush. This was followed by washing and rinsing of floors with water and extracting the soil with a wet vacuum.

The next step was to apply a full set of Tile Doctor Stone Burnishing pads from 200 grit, 400 grit, 800 grit and finishing with 1500 grit for a honed look. We worked through the pads in 10 metre sections at a time lubricating with water and rinsing with water between each pad.

The kitchen and hallway floors were then allowed to dry out fully overnight.

Sealing Polished Limestone Tiles

The next day I returned to the property and completed the polishing process by applying the very fine 3000 grit burnishing pad with a little water and leaves a high shine finish.

The floor was then sealed with three coats of Tile Doctor Ultra Seal, which is a premium, natural look, impregnating sealer designed to provide maximum stain protection without altering the colour of the stone. The sealer takes an hour to dry and with three coats to apply it took most of the day to finish.

Honed Limestone Floor After Restoration Upper Boddington

The customer was happy with the results and left the following 5-star review on our site.

“Superb Service Chris P, Daventry”

Honed Limestone Floor After Restoration Upper Boddington

 
 

Professional Cleaning, Polishing and Sealing of a Honed Limestone Floor in Northamptonshire

Limestone Kitchen Tiles Cleaned, Polished and Sealed in Ashton

It’s always nice when one of our former customers refers their family and friends to Tile Doctor as it’s a testament to the great work we do. As the Tile Doctor for Northamptonshire, I often carry out tile cleaning and restoration jobs in the Oundle area.

Recently, a customer from the nearby village of Ashton was referred to me by a friend. Her friend has the same type of floor in the same type of barn conversion in the area, and had chosen to use our services both last year and this year for their annual maintenance clean.

This new customer had a polished Limestone kitchen floor that was proving difficult to keep clean. The grout had become extremely dirty and – in the absence of an effective sealer – dirt and general muck had easily penetrated the pores of the Limestone itself. The result was a very dull appearance – not one that any property owner wants to suffer!

Polished Limestone Floor Before Cleaning Ashton Polished Limestone Floor Before Cleaning Ashton

On our initial inspection visit, we always carry out a test clean within a small area of the floor to give the customer an idea of the final results they can expect. Upon my first visit to this property, I carried out the test clean and the customer couldn’t believe the difference made to the appearance of the grout lines. In fact, she had even forgotten their original colour!

Cleaning and Burnishing Polished Limestone Kitchen Tiles


When I next visited the property, it was time to carry out the full restoration. The work was carried out in sections of around 10m2 each, with two Tile Doctor technicians on site using the latest Tile Doctor products and machinery.

The issue of the extremely dirty grout lines was tackled first. We cleaned them with Tile Doctor Pro-Clean, which is a high alkaline tile and grout cleaner. We will use Tile Doctor Pro-Clean on all types of natural stone – it’s just that reliable for cutting through the grime. The product was applied using specialised grout brushes and the resulting chemical slurry was rinsed away using fresh water and extracted with a wet vacuum.

Polished Limestone Floor During Cleaning Ashton

Satisfied with the cleanliness of the grout lines, we moved onto improving the appearance of the polished Limestone tiles. When it comes to restoring polished stone, including Limestone, Travertine and Marble, we typically use a process we have developed known as ‘burnishing’. Burnishing involves both cleaning the tile and gradually polishing it to achieve a high-quality, long-lasting sheen finish.

We use a set of four diamond-encrusted burnishing pads fitted to a rotary machine to do this. The first to be applied is a pad with a Coarse grit, which breaks down any old sealer and shaves off the very top layer of the dirty stone, leaving a fresh surface beneath.

Next, burnishing pads with Medium, Fine and Very Fine grits are applied to slowly but surely polish the stone, achieving a very pleasant and shiny appearance. In most cases, the tiles come out looking better than they did when they were originally installed!

Once burnished, the floor was left overnight.

Sealing Polished Limestone Kitchen Tiles


The following day, we returned to seal the tiles. We did this using two coats of Tile Doctor Ultra-Seal, a sealant which is formulated to protect the floor and grout lines against dirt build-up and staining.

Polished Limestone Floor After Cleaning Ashton

The very happy customer was given a complimentary bottle of Tile Doctor Stone Soap, which is a highly concentrated neutral stone cleaner that helps to maintain the patina on polished stone. This will help her keep the appearance of the floor maintained until her next maintenance clean with Tile Doctor.

Polished Limestone Floor After Cleaning Ashton

 
 

Professional Renovation of a Dirty Limestone Tiled Floor in Northamptonshire

Removing Limescale staining from a Black Limestone Shower Cubicle in Everdon

Limescale deposits are a big problem in many parts of the UK where hard water is common. To remove it you need to use a strong acidic cleaner however what to do if you have limescale deposits on Limestone? As many may already know, Limestone is an expensive, high-quality stone that like a lot of natural stone is acid sensitive and can be damaged with the application of acid-based products.

Black Limestone Shower Cubicle Before Cleaning Everdon Vilage

You can use acids on Limestone however if your careful and I demonstrated this recently at a property in this village of Everdon near Daventry in Northamptonshire. My customer had a fantastic black Limestone tiled shower cubicle that had been absolutely ruined by white limescale staining and it had reached the point where the situation simply couldn’t be resolved with standard cleaning products.

Black Limestone Shower Cubicle Before Cleaning Everdon Vilage

Cleaning and Burnishing a Stained Black Limestone Shower Cubicle

As the staining was so severe, I opted to use Tile Doctor Acid Gel to clean the tiles. This is a blend of phosphoric and hydrochloric acids in gel form and is the best product for cleaning vertical services, since water based products just run off and don’t have time to work on the staining.

Working in small areas, I carefully scrubbed the product into the stone and then rinsed it off with plain water. This process was repeated across the whole cubicle, reducing the stains significantly in the process.

Next, I used a handheld polishing machine fitted with 6” diamond encrusted burnishing pads, along with some water for lubrication, to polish and deep clean the stone, removing any stubborn stains remaining on the tiles.

Sealing a Black Limestone Shower Cubicle

I left the cubicle to dry completely overnight. Upon my return the next day, I proceeded to seal the tiles using two coats of Tile Doctor Colour Grow sealer.

This sealer is impregnating, meaning it fils the pores of stone to protect against ingrained dirt and staining. As well as providing stone protection, Colour Grow also enhances the natural colour in the stone – in this case, the deep black shades in the Limestone.

Black Limestone Shower Cubicle After Cleaning Everdon Vilage

Having finished the job, I gave the very happy customer some advice on keeping limescale and other staining at bay in future. I explained that proper maintenance can be conducted by simply rinsing the tiles with clean water after each use of the shower, and by using Tile Doctor Aqua-Pro tile aftercare cleaner at least once a week.

Black Limestone Shower Cubicle After Cleaning Everdon Vilage

 
 

Professional Limescale Removal from Acid Sensitive Stone in Northamptonshire

Polished Limestone Tiles Burnished and Restored Near Oundle

Limestone is known on the international market to be a stone of premium quality, durability and toughness, and Limestone tiles give any property a high-end wow factor when they are looking their best. To maintain that appearance however does require some work and this is where Tile Doctor is happy to assist.

This Polished Limestone tiled floor had been installed four years prior in the kitchen and living room of a house in Ashton Village, near Oundle in Northamptonshire. The tiles had lost their shine and the grout had become dirty and stained and the floor in general was proving to be increasingly difficult to clean.

Polished Limestone Floor Before Cleaning Ashton Village

This is a common problem with polished stone floors, the surface polish and sealer wear down over time allowing dirt to penetrate. At a loss with what to do to restore the appearance of the floor, the property owner called me in to give the Limestone a professional-level clean, seal and polish.

Polished Limestone Floor Before Cleaning Ashton Village

Burnishing and Cleaning Polished Limestone Tiles

With tiles made of Limestone, Travertine, Marble and other high quality polished stone, we find that the best way to restore appearance is through a process known as burnishing.

Our burnishing system involves the application of four different diamond encrusted pads. Working in small sections of between four and six square metres, I applied the first pad, which uses a coarse grit to remove light scratches and dirt, followed by a pad with a medium grit pad to prepare the floor for polishing. Next, I used the third pad with a fine grit to start the polishing process.

Before moving on to the fourth and final pad, I cleaned the grout lines using handheld brushes in combination with Tile Doctor Pro-Clean, which is a high alkaline tile and grout cleaner that is safe to use on tiled floor. The floor was rinsed and the soiled cleaning solution extracted using a wet vacuum.

Sealing Polished Limestone Tiles

Following this, I allowed the floor to dry completely overnight. Upon my return to the property the next day, I used the fourth pad, which uses a Very Fine grit is to give the stone a high shine finish.

The floor was then ready to be sealed with Tile Doctor Ultra Seal, which is a premium, natural look, impregnating sealer designed to provide maximum stain protection. This was allowed to dry for an hour, before I then re-polished the tiles to remove any excess sealer and to refine the finish the absolute best quality possible.

Polished Limestone Floor Ater Cleaning Ashton Village

The benefit of the burnishing pad system is that no chemicals are used (just a small amount of water for lubricant) so it is environmentally-friendly. I recommend the customer to use Tile Doctor Neutral Cleaner in the future to provide quick and effective maintenance. She was very pleased with the results and now she will be well-equipped to keep the floor in fantastic shape.

Polished Limestone Floor Ater Cleaning Ashton Village

 
 

Professional Tile Cleaning, Polishing and Sealing for a Polished Limestone Tiled Floor Restoration near Oundle

Poorly Sealed Limestone Tiled Floor Restored in Kislingbury

The owner of this house in the town of Kislingbury, Northampton called me in because her sealer wasn’t performing very well and the floor had only been cleaned and sealed 6 months previous by her builders contractor. Although the rest of the floor was in very good condition there were quite a few tiles that were being easily scratched from day to day use and stained from liquid spills which should have been easy to remove.

Limestone Tiles Kislingbury Before Cleaning

It isn’t always the case that a whole floor is in poor condition, it can be just the high foot traffic areas or just a few damaged tiles either way it can spoil the appearance of the entire feature.

Limestone Tiles Kislingbury Before Cleaning

Upon initial contact with my client, we talked through the work the previous contractors had carried out. Then, upon testing the affected areas of the floor, I discovered that that the sealant had been applied very patchily, meaning it had better coverage in some areas than others. I also speculated that the underfloor heating in the room may have affected the curing of the sealant as it dried.

Cleaning a Limestone Tiled Floor

Even though this work was carried out in January, with outside temperatures of -2 degrees, I insisted that the underfloor heating was turned off to eliminate the potential of it impacting the performance of any products used during the restoration.

I began by stripping off all of the old sealer with the coarse pad from the Tile Doctor burnishing system. I then diluted a solution of the high alkaline cleaner Tile Doctor Pro Clean and this was mainly applied to clean the grout lines because as I previously mentioned, the condition of the tiles was generally speaking very good. The solution was allowed to dwell for approximately ten minutes, before I proceeded to agitate the area with a scrubbing brush to remove ingrained dirt. The floor was then finished off using the rest of the pads in the burnishing pad system to restore the surface shine and then rinsed down with water to remove the slurry.

Sealing a Limestone Tiled Floor

After allowing the floor adequate time to dry, I sealed it with Tile Doctor Colour Grow, an impregnating sealer which provides not only a durable surface seal, but also contains properties which intensify the natural colours in the Limestone.

I completed the seal with the underfloor heating off and this allowed the sealer to cure properly. Just to make sure, I also tested several different areas for water repellency – it was only after that I allowed my client to put the heating back on!

Limestone Tiles Kislingbury After Cleaning

The photos really show the difference made in the appearance of those areas of the floor that were once stained. Needless to say that the several days of work were really worth it to get this Limestone tiled floor back to looking its best. With a deep clean and robust, properly applied sealer, this floor will be protected against damage for a long time to come.

Limestone Tiles Kislingbury After Cleaning

 
 

Cleaning and Sealing a Limestone Tiled Floor in Northamptonshire

Cracked Limestone Conservatory Floor Restored in Grafton Underwood

Here is a job I completed late last year in the charming tranquil village of Grafton UnderwoodFlagstone tiled Living Room which you will find I have written about previously.

This second floor was Polished Limestone that had been laid in their conservatory. The floor was not only was in dire need of a thorough clean and fresh seal, but was also suffering from cracks in some areas.

Limestone Tiled Conservatory Grafton Underwood Before Cleaning Limestone Tiled Conservatory Grafton Underwood Before Cleaning

Repairing a Limestone tiled conservatory

My first task was to address the multiple cracks in the floor, which I repaired by filling with a colour matching filler.

Limestone Tiled Conservatory Grafton Underwood Before Cleaning
I also managed to remove some displeasing rust marks ruining the appearance of the floor by using Tile Doctor Rust Away. Rust Away is used to remove embedded rust stains on any type of Stone or Clay-based tile.

Limestone Tiled Conservatory Grafton Underwood Before Cleaning Limestone Tiled Conservatory Grafton Underwood After Polishing

Cleaning a Limestone tiled conservatory

I then gave the conservatory floor a thorough clean, focusing first on the grout with Tile Doctor Pro Clean, a high alkaline cleaner that’s safe to use on Tile, Stone and Grout.

The Limestone tiles were then cleaned and re-polished with Tile Doctor Diamond encrusted burnishing pads. I started with the Coarse burnishing pad to remove dirt and old sealer before moving through the other pads from Medium to Fine, stopping to lubricate and rinsing the area with a little water after burnishing with each pad.

Sealing a Limestone tiled conservatory

After completing the clean, I left the conservatory to dry fully overnight. Upon my return to the house the next day, I ran damp tests to confirm the floor was dry enough to take the sealant, and then proceeded to seal the tiles with two coats of Tile Doctor Colour Grow.

Limestone Tiled Conservatory Grafton Underwood After Polishing Limestone Tiled Conservatory Grafton Underwood After Polishing

Colour Grow is a sealant which offers a robust surface seal, while also enhancing the natural colours in the stone. It also offers an aesthetically pleasing matte finish, which is exactly what my client had requested. My client also left the following message on the Tile Doctor feedback system.

Everything carried out when promised and with due consideration and explanation. Likely to have more work done next year.

Repairing, Cleaning and Polishing Limestone Conservatory Tiles in Northamptonshire

Removing ingrained dirt from Crushed Edge Limestone tiles in Corby

Limestone is a natural stone with a lot of unique character and surface features with each tile being uniquely different from the last. These surface characteristics however can however make a stone very difficult to clean and unless sealed can result in dirt becoming trapped and ingrained. These particular Limestone tiles installed throughout the downstairs floor of a house in Corby are known as Crushed Edge Limestone and have an increased susceptibility to this issue. As you can see from the photographs below the crevices in the tile have become black with trapped dirt which has proved very difficult to clean.

Crushed Edge Limestone Corby Before Crushed Edge Limestone Corby Before

Cleaning Crushed Edge Limestone

Limestone is a very hard surface that has to be burnished with diamond encrusted pads to restore the finish so we set about this task using a set of Tile Doctor Burnishing Pads. Before starting however we soaked the floor in Tile Doctor Pro-Clean and scrubbed this into the tile surface spending particular attention on the grout lines; this process gets a head start on the cleaning and also remove any grit etc. that might cause problems before burnishing. The soiled solution was then rinsed away using water and all was removed using a wet vacuum.

Burnishing Crushed Edge Limestone

The burnishing pads come in a set of four, you start with the coarse pad together with a little water and this cut’s through and removes surface grime and any remaining surface sealer. The resultant slurry is washed away and you then progress through the other finer pads one by one until you get to the final polishing pad which provides a nice shine. You need to rinse the tiles in-between and use a wet vacuum to remove the slurry.

Sealing Crushed Edge Limestone

When we came back the next day we tested a few areas for dampness before starting to seal the floor, this is an important step for this type of tile as it can easily trap dirt. We chose Tile Doctor Ultra-Seal for this, it’s a natural look impregnating sealer that occupies the tiny pores in the stone preventing dirt and other contaminates from becoming ingrained, two coats were sufficient. Once the sealer had fully dried we went over it with a white buffing pad to finish.

Crushed Edge Limestone Corby After Crushed Edge Limestone Corby After

 
 

Cleaning Limestone Tiles in Northamptonshire