This customer from Burton Latimer near Kettering was having a new kitchen fitted which would have a different layout to the original. The Ceramic tiled floor was wall to wall and they wanted to see if the tiles could be renovated rather than having to replace them.
I attended the customers property to inspect the floor and carry out a test clean on one of the dirtiest ceramic tiles and adjacent grout. The tiles were in a fairly grubby condition and the grout was black with dirt which happens a lot with Ceramic tiled floors. This is due to the ceramic tile being impervious and so the dirt from the tile becomes washed into the grout lines during cleaning.
I carried out the test clean which went well and my customer was impressed; keen to proceed and happy with my quotation the work was booked in. The renovation was scheduled for the day after the old kitchen was removed and before the new kitchen was installed the following week.
Deep Cleaning Ceramic Tile and Grout
To deep clean the tile and grout a strong 1:3 dilution of Tile Doctor Pro-Clean and warm water was applied to the floor with a pump-up sprayer. The solution was allowed to dwell for several minutes before being worked into the grout using a stiff brush. This was followed up by agitating the solution into the rest of the floor with a rotary floor scrubbing machine fitted with a stiff brush attachment.
Working in sections and removing slurry with a wet pick-up machine. The next process was to apply Tile Doctor Grout Clean-up to all grout lines for a second clean to remove as much stubborn staining as possible. Again, this was worked into the grout with stiff grout brushes. Following this I went over the floor again with a black scrubbing pad attached to the rotary machine. The machines solution tank was filled with water to help lubricate the process and neutralise the floor.
Finally, all the excess water was removed with a wet pick-up machine and the floor was left to dry off overnight.
Sealing Grout on a Ceramic Tiled Floor
I returned the following day to seal the grout, Ceramic tiles won’t take a sealer and as mentioned earlier its best to seal the grout so the dirt remains on the surface and doesn’t get trapped in the rough grout.
After confirmed the floor was dry, I carefully applied Tile Doctor Ultra-Seal to the grout lines using a pipette and then wiping off any excess afterwards.
Once done the floor looked new and my client was happy with result, it was a good decision and even more so when you consider the money saved in comparison to replacing the floor.
Tile Doctor is the only Tile, Stone and Grout cleaning service in the UK on Trustpilot, and with a 4.7 Star rating based on over 1,300 verified customer feedbacks you can be certain you’re in good hands