These photographs of a Slate tiled floor were taken in the Kitchen of a house in Towcester where the slate was looking rather dull and had lost its appeal. This does happen with natural stone floor where the sealer which can add a shine to the stone becomes worn down and ineffective.
 |
 |
Cleaning Chinese Slate Tiles
We removed the kickboards from the kitchen units and lined the skirting boards with green Frog tape in order to protect them from cleaning fluids. The next step was to soak the floor in a dilution of Tile Doctor Pro-Clean which we let soak into the tile for 10-15 minutes before scrubbing it in with a rotary machine fitted with a black pad and then using a stiff grout brush to clean out the grout lines.
 |
 |
The floor was then thoroughly rinsed using clean water which was then removed using a wet vacuum. The floor was now free of sealers etc. and this showed up a few stubborn areas that needed to be retreated and washed down again. It’s important to give the floor a good rinse to ensure it’s free of any cleaning products as they can upset the sealer.
 |
 |
Sealing the Slate Tiled Floor
The floor was left to dry and we came back the next day to seal the slate using five coats of Tile Doctor Seal and Go applied using a paint pad applicator. I usually use Seal and Go for slate tiles as it provides good stain protection with adds a nice sheen finish that adds to the look of the floor.
 |
 |
The job took two days and the floor now looks much better and much easier to clean, certainly the customer was very pleased and left the following message on our feedback system.
Phil is extremely professional and provided excellent customer service. He explained the process in detail and did a thorough job and worked extremely hard. The job was completed in the time proposed with a brilliant result. We have no hesitation in recommending Phil to others. Thank you.
Pete and Angie, Towcester
A strong dilution of Pro-Clean should take off a sealer however if you need something stronger use Remove and Go