corby Archives - Northamptonshire Tile Doctor

Limestone Tiled Kitchen Floor Renovation Geddington

Pitted Limestone Floor Deep Cleaned, Polished, Filled and Sealed in Geddington

This client from Geddington called me in to renovate their Limestone tiled floor which had been installed throughout much of the ground floor. Limestone like any natural stone is porous and will suffer from ingrained dirt if the sealer isn’t maintained, so it’s not unusual to need work like this doing every three to five years.

Limestone Tiled Kitchen Floor Before Cleaning Geddington

I visited the property to survey the tiles and could see the stone had quite a lot of surface pitting which was trapping dirt and making it very difficult to keep clean. Pitting is quite common in this type of stone, and they are usually filled at the factory, however the filler can become dislodged with wear and the problem can be made worse by the use of acidic cleaning products.

Limestone Tile Kitchen Floor Before Cleaning Geddington

Limestone Tiled Steps Before Cleaning Geddington

After surveying the floor, I came up with a comprehensive renovation plan that included deep cleaning the stone, filling the pits, polishing, and then sealing. I also made a note to discuss aftercare cleaning at the end so the floor wouldn’t get so bad in future.

Happy with my plan and quote a date was agreed for the work to commence.

Cleaning a Pitted Limestone Tiled Kitchen Floor

It was a large floor so to minimise disruption to the owner I split the job up into several areas and worked through the following process.

Work started with a general clean of the floor using Tile Doctor Pro-Clean with a focus on cleaning the grout. I used a strong dilution of Pro-Clean, left it to soak into the stone and grout for around ten minutes and then scrubbed it into the floor using a black pad fitted to a rotary machine. I also ran a stiff grout brush along the grout lines to get them as clean as possible. Once done the floor was rinsed and the soiling extracted with a wet vacuum.

The next step was to hone the Limestone using a set of diamond encrusted burnishing pads. These pads are great for bringing up the polish on a stone floor like this and you start with a coarse 400-grit pad fitted to a rotary floor buffer. Water is used to lubricate the process and the pads are run over each tile three or four times. The floor is then rinsed and extracted as before, and the process repeated with the 800 and then 1500 grit pads.

Once done the floor was looking much cleaner and brighter and ready for the next step which was to fill the pits. To do this I inspected the floor, identifying all the areas that needed attention and then filled those holes with a resin filler that is colour matched to the stone.

Sealing a Pitted Limestone Tiled Kitchen Floor

The last step was to seal the limestone and for this I used Tile Doctor Ultra-Seal which is an impregnating sealer that soaks into the stone, occupying the pores of the stone and thereby preventing dirt from residing there. Sealing keeps the dirt on the surface where it can easily be cleaned away. Ultra-Seal doesn’t contain any colour enhancers, so it leaves the stone with a very natural appearance which is what my client wanted.

Limestone Tile Kitchen Floor After Cleaning Geddington

Limestone Tiled Steps After Cleaning Geddington

The floor was transformed by the work and my client was very happy with the result, they even went to the trouble to leave the following review:

“We are absolutely delighted with the work undertaken by Philip, the Northamptonshire Tile Doctor. He has completely transformed very dirty limestone floors into something of great beauty – better than new. Philip was a pleasure to deal with throughout and we can highly recommend him.”

Limestone Tiled Kitchen Floor After Cleaning Geddington

With regards to aftercare cleaning, I recommended they use Tile Doctor Stone Soap which is designed for cleaning polished stone floors and helps maintain the patina.

Professional Restoration of a Limestone Tiled Floor in Northamptonshire

Pitted Limestone Floor Deep Cleaned, Polished, Filled and Sealed in Geddington Read More »

Removing ingrained dirt from Crushed Edge Limestone tiles in Corby

1 Comment / Kettering Tile Cleaning, Limestone Tile Cleaning and Polishing, Work History / Philip Vissian / cleaning limestone tiles, cleaning services, corby, floor restoration, limestone floor, northamptonshire, sealing limestone floor, tile cleaning, tile maintenance, tiled floor

Limestone is a natural stone with a lot of unique character and surface features with each tile being uniquely different from the last. These surface characteristics however can however make a stone very difficult to clean and unless sealed can result in dirt becoming trapped and ingrained. These particular Limestone tiles installed throughout the downstairs floor of a house in Corby are known as Crushed Edge Limestone and have an increased susceptibility to this issue. As you can see from the photographs below the crevices in the tile have become black with trapped dirt which has proved very difficult to clean.

Cleaning Crushed Edge Limestone

Limestone is a very hard surface that has to be burnished with diamond encrusted pads to restore the finish so we set about this task using a set of Tile Doctor Burnishing Pads. Before starting however we soaked the floor in Tile Doctor Pro-Clean and scrubbed this into the tile surface spending particular attention on the grout lines; this process gets a head start on the cleaning and also remove any grit etc. that might cause problems before burnishing. The soiled solution was then rinsed away using water and all was removed using a wet vacuum.

Burnishing Crushed Edge Limestone

The burnishing pads come in a set of four, you start with the coarse pad together with a little water and this cut’s through and removes surface grime and any remaining surface sealer. The resultant slurry is washed away and you then progress through the other finer pads one by one until you get to the final polishing pad which provides a nice shine. You need to rinse the tiles in-between and use a wet vacuum to remove the slurry.

Sealing Crushed Edge Limestone

When we came back the next day we tested a few areas for dampness before starting to seal the floor, this is an important step for this type of tile as it can easily trap dirt. We chose Tile Doctor Ultra-Seal for this, it’s a natural look impregnating sealer that occupies the tiny pores in the stone preventing dirt and other contaminates from becoming ingrained, two coats were sufficient. Once the sealer had fully dried we went over it with a white buffing pad to finish.

Cleaning Limestone Tiles in Northamptonshire

Removing ingrained dirt from Crushed Edge Limestone tiles in Corby Read More »

Cleaning and Sealing Kitchen Slate Tiles in Corby

1 Comment / Kettering Tile Cleaning, Slate Tile Cleaning, Work History / Philip Vissian / cleaning services, corby, floor restoration, kitchen cleaning, northamptonshire, sealing slate tiles, slate tiles, tile cleaning, tile maintenance, tiled floor

Another example of a tired Slate Tiled floor that was in need of a clean and seal, this time in the industrial town of Corby famous for its iron and steel works.

Cleaning Slate Kitchen Tiles

To get the Slate tile and grout clean the a dilution of Tile Doctor Pro-Clean was applied which was left to soak into the tile for ten minutes before scrubbing it in with a rotary machine fitted with a black scrubbing pad and then using a stiff grout brush to clean along the grout lines.

The floor was then thoroughly rinsed using clean water which was then removed using a wet vacuum; there were a few stubborn areas that needed further attention which were re-treated. The last step of the cleaning process was to use a high pressure cleaning tool that extracts as well as washes, we normally use this tool for cleaning carpets but it also does a great job of giving a hard floor a thorough rinse to remove any trace of cleaning product before sealing.

Sealing the Slate Tiled Floor

The floor was left to dry and we came back the next day to seal the slate using five coats of Tile Doctor Seal and Go applied using a paint pad applicator. I usually use Seal and Go for slate tiles as it provides good stain protection with adds a nice sheen finish that adds to the look of the floor.

The job took two days and the floor now looks transformed.

Cleaning and Sealing a Slate Tiled Floor in Northamptonshire

Cleaning and Sealing Kitchen Slate Tiles in Corby Read More »