tile cleaning

Travertine Tiled Hallway and Kitchen Floor Renovated Welton Daventry

Dirty Tumbled Travertine Floor Renovated in Welton near Daventry

This is a Tumbled Travertine floor with a Honed finish that was installed some years prior in the hallway and kitchen of a house in the village of Welton near Daventry. Kitchens and hallways have the highest foot traffic of any room in a house and without regular maintenance the sealer started to wear down allowing dirt and staining to reach the pores of the tile and grout lines. Travertine is known for its small depressions known as pitting and without the protection of the sealer those areas became heavily soiled. The grout had also darkened with ingrained dirt turning what was a light grey colour into a contrasting black.

Tumbled Honed Travertine Welton Before Cleaning

After visiting the property and surveying the floor I recommended burnishing the floor with a set of abrasive pads to remove the dirt and then resealing with a more durable product. To prove my point, I ran a small test clean on the floor so they could see the potential difference this could make. Happy with the result they asked for a quote which was accepted, and the job was booked in.

Cleaning a Tumbled Travertine Tiled Kitchen Floor

I started the cleaning process by sweeping and vacuuming the floor to remove any grit and other debris. Then it was cleaned with a 3:1 dilution of Tile Doctor Pro-Clean, spraying it onto the floor and allowing it to dwell and make a start breaking down the soiling. The product was then worked into the floor using a stiff brush paying particular attention to the pitted areas and along the grout lines to get them clean. This was followed by rinsing the floor with more water and extracting the soiling with a wet pick-up machine.

The next step was to use the burnishing pad system starting with the coarse pad fitted to a rotary machine and worked into the tiles with a small amount of water for lubrication. The set of pads come in various grits and are actually made from industrial diamonds.

This first 400-grit pad cleans the tiles and removes any remaining sealant that may have been present on the tiles. This was continued with the finer 800-grit pad, again using nothing but water and then rinsing the floor of any slurry generated by the process after each pad.

When the floor had dried, I applied a fine 1500-grit pad to bring up the polish on the Travertine until it had a silky honed finish. There is a fourth 3000-grit pad in the system that brings up the polish even further to achieve a high shine finish, but my client didn’t want that look.

Tumbled Honed Travertine Welton During Cleaning

Sealing a Tumbled Travertine Tiled Kitchen Floor

To protect the travertine, it was sealed using three coats of Tile Doctor Ultra-Seal sealant which is an impregnating invisible sealer resulting in a very natural finish. Once dry the floor was buffed using a soft white buffing pad.

Tumbled Honed Travertine Welton After Cleaning

You can see from the photos how much cleaner and lighter the Travertine tiles look and that the light grey colour of the grout has been restored. The new sealer will make it much easier to maintain now and with the correct cleaning regime in place the sealer should last a long time. My client was very happy with the work and left the following feedback for me:

“Really happy with our new floor. The service was professional and thorough – definitely worth the money.”

For the regular cleaning of a floor like this I recommend Tile Doctor Stone Soap which is a mild cleaning product that’s designed for use on sealed and polished stone. You must be especially careful when choosing a cleaning product for sealed tiles as many of the products you find in supermarkets are simply too strong and can degrade the sealer prematurely.

Tumbled Honed Travertine Welton After Cleaning

 

Professional Restoration of a Travertine Tiled Floor in Northamptonshire

Dirty Tumbled Travertine Floor Renovated in Welton near Daventry Read More »

Quarry Tiled Floor Restoration Bozeat

Quarry Tile Repairs and Restoration at a period cottage Bozeat

The following photos are of a Quarry tiled dining room floor in a period cottage located in the small village of Bozeat. My customer had removed a carpet and discovered them underneath, as you can see from the photographs however the tiles were in a poor state of repair. Undaunted the owner wanted to restore them as a lovely period feature and contacted Tile Doctor.

Quarry Tile Floor Before Restoration Bozeat Cottage Quarry Tile Floor Before Restoration Bozeat Cottage

I went over to survey the Quarry tiles and could see the floor had not faired well under the carpet over the years, several tiles were cracked and 40 to 50 tiles were loose and would needed resetting to stop them moving underfoot, especially in the high traffic areas. I discussed with them that Tile Doctor could repair the floor and clean it and would be able to restore in a few days. They were happy to go ahead with my quote and we arranged a mutually convenient time to carry the work out.

Cleaning and repairing a Quarry Tiled Hallway Floor

My first course of action was to deep clean the floors using Tile Doctor Oxy-Gel which is an alkaline cleaner. Working in small areas the Gel was worked in using a stiff brush on a rotary machine using a little water. As this process was completed in each area, I rinsed off the resulting slurry away with water and then extracted using a wet vacuum. The initial clean removed most of the black staining and paint spots which had occurred over the years, but more work was needed.

The next step was to apply Tile Doctor Grout Clean-Up to further clean up the tiles and tackle the cement residue and other staining. I used a repeat of the cleaning process and rinsed twice with plain water to ensure all traces of product were removed. The next step was to tackle the broken and loose tiles however it was now the end of day one, so after assessing the floor for all repairs required, I installed a portable dryer to aid drying and left for the day.

Quarry Tile Floor During Repair Bozeat Cottage Quarry Tile Floor During Repair Bozeat Cottage

The next day I returned to begin repairs starting by lifting all the loose tiles, working in one square metre sections at a time. Fortunately, my customer had already managed to obtain reclaimed tiles from a reclamation yard so that saved me a job. The colours matched with the originals; however, the reclaimed tiles were slightly larger than the originals and needed to be cut into shape as required. Working methodically, I re-laid the tiles on a fresh bed of screed and grouted them in to match the original floor as best possible.

Quarry Tile Floor During Repair Bozeat Cottage Quarry Tile Floor During Repair Bozeat Cottage

After the repairs were completed I allowed the floor to fully dry for four days, I needed the tiles dry and the newly laid adhesive and grout to set and bed in before the next step. Before leaving I gave my customer strict instructions not to walk over these areas whilst I was gone.

Sealing a Quarry Tiled Hallway Floor

Returning later the following week, I first checked the floor was dry using a damp meter, once satisfied I was able to start the sealing process. The customer had requested a silk finish, however because of the age of the cottage and the possibility of damp in this old floor my choice of sealer was limited to those that are fully breathable.

Quarry Tile Floor After Restoration Bozeat Cottage

On this occasion I chose to apply several coats of Tile Doctor Seal & Go Extra, this product will allow the floor to breathe and provide the desired finish. It was a good decision, and as hoped it enhanced the appearance of the floor beautifully.

Quarry Tile Floor After Restoration Bozeat Cottage

My customer was very happy with the renovation and the transformed floor and left the following feedback:

“Friendly service, reasonably priced and a good standard of work. Has breathed new life into my old quarry tile floor.”

 

Professional Restoration of a Quarry Tiled Floor in Northamptonshire

Quarry Tile Repairs and Restoration at a period cottage Bozeat Read More »

Travertine Tiled Floor Before After Renovation Brixworth

Travertine Floor Tiles Repaired and Polished in Old Near Brixworth

Polished Travertine is a popular tile which can look stunning, however without the correct maintenance regime in place it can soon turn dull and flat as my customer in the small village of Old near Brixworth discovered. In this case they had 40m2 of Travertine tiling installed in the living room and breakfast room which in particular had become dull, sticky, and hard to clean. On top of that a couple of holes had appeared in the main kitchen walkway areas which was causing concern.

Polished Travertine Kitchen Floor Before Renovation Brixworth

I visited the property to carry out a site survey and conduct a test clean on the stained areas. My customer was relieved to see how well the grout and staining responded to the cleaning and we moved on to discuss how to repairs the holes. We see this a lot with Travertine where natural holes or pitting are usually filed with a resin before being sold but the problem can be exacerbated with the use of acidic cleaning products. Holes also trap dirt which can accumulates quickly as dirt is washed into the holes during cleaning detracting from the appearance of the stone.

Polished Travertine Kitchen Floor Before Renovation Brixworth

To resolve I planned on filling the holes with a resin and then re-polishing the floor to make it blend in. A quote was issued via e mail which was accepted, and a date booked in the diary for work to be carried.

Cleaning and Restoring Travertine Tiled Kitchen Floor

On the day I arrived the customer had prepared the work area by removing all small items of furniture. My first step was to brush and vacuum the area to remove any loose debris. I then sprayed the floor with a dilution of Tile doctor Pro-Clean focusing on the heavily soiled areas and grout lines throughout the breakfast area and then left to soak in for ten minutes. After scrubbing the grout with a grout brush the area was rinsed with a small amount of water and the area dried using a wet vacuum. This process was then repeated in the kitchen.

Tile Doctor has found the best way to renovate polished stone is to use a set of diamond encrusted burnishing pads to hone the stone and build back the polish. Usually this involved applying a set of for or five pads of different grits depending on the severity of soiling and any surface scratches. I started with the coarsest grit and worked through in sequence to the finer grits to achieve a polished finish. Water is used to lubricate the process and the floor is rinsed and extracted between pads.

Once this process was completed, I dried the damaged tiles with a heat gun so I could fill them. I mixed a resin that closely matched the white and brown colours of the Travertine and filled in the holes, smoothing, and polishing with handheld diamond blocks to achieve a smooth finish.

Polished Travertine Kitchen Floor After Renovation Brixworth

Sealing a Travertine Tiled Kitchen Floor

When we returned the next day, the floor had dried, and I was able to give the floor a final polish with a very fine 3000-grit burnishing pad applied with a little water sprayed onto the tile. Finally, the floor was then sealed with two coats of Tile Doctor Ultra-Seal which provides excellent protection without changing the colour of the stone to provide a natural look.

Polished Travertine Kitchen Floor After Renovation Brixworth

Last step was to provide some advice on how to maintain the floor going forward for which I recommend Tile Doctor Stone Soap which is designed for cleaning polished stone floors. The client was over the moon with the outcome and surprised at the improvement, they also left the following review for me which is always a nice surprise.

Fantastic work, my floor looks wonderful it didn’t look this good when it was laid thirteen years ago, I will definitely look after the travertine now and have the floor cleaned and resealed every year.

 

Professional Restoration of a Travertine Tiled Kitchen Floor in Northamptonshire

Travertine Floor Tiles Repaired and Polished in Old Near Brixworth Read More »

Terracotta Tiles Before After Deep Cleaning and Sealing Maidford

Terracotta Tiled Kitchen Floor Renovated at a Maidford Cottage

This Terracotta tiled floor was installed in the kitchen of a cottage in the small village of Maidford near Towcester. The tiles were not looking their best and the owner of the property realised it was time to do something about it and contacted Tile Doctor to have the floor stripped and resealed. Stripping and Sealing tile and stone floors is our bread and butter so I was more than happy to pop round and survey the floor which was approximately 9m2.

The grout had darkened with dirt and the previous tile sealer was failing so dirt was now getting ingrained in the Terracotta making it difficult to clean in places and leading to a patchy appearance. We discussed the work involved, my quote was accepted, and a date agreed for me to return and complete the work which would take two days, one to clean and one to seal.

Terracotta Tiled Kitchen Floor Before Cleaning Maidford

Stripping Terracotta Kitchen Floor Tiles

After tidying up the Kitchen and removing the kickboards from underneath the kitchen units I set about working on cleaning and stripping the Terracotta floor of old sealers. To start I tested a small area with a strong dilution of Tile Doctor Wax Away. Wax was quite often used on Terracotta so I figured this product would be a good place to start. My suspicions were proved correct, and I found this to be the best product for removing the many layers of sealant on the floor. Wax Away is a new alkaline product by Tile Doctor and ideal for cleaning clay-based tiles such as Terracotta.

Terracotta Tiled Kitchen Floor During Cleaning Maidford

With my sights set on the rest of the floor Wax Away was scrubbed into the tile using a 17” rotary floor scrubbing machine and a black scrubbing pad running on a slow speed which helps to reduce splashing. This activity soon brought the dirt off the floor and the soiled cleaning solution was removed using a wet vacuum and the floor was rinsed down with clean water. The cleaning process was repeated a couple of times until I was happy with the floor, a stiff hand brush was then used along the grout lines with a dilution of Tile Doctor Pro-Clean to clean up the grout.

Terracotta Tiled Kitchen Floor During Cleaning Maidford

After rinsing and extracting the floor again the floor was inspected, and I noticed there were a few stubborn paint splashes on the tiles. I managed to remove these and these by spot treating the affected area with Tile Doctor Remove and Go and a steamer to lift the stain out of the clay tile. Once happy the floor was clean it was given a thorough rinse to neutralise it and remove any trace of cleaning products and then left it to dry.

Terracotta Tiled Kitchen Floor After Cleaning Maidford

Sealing Terracotta Floor Tiles

I allowed the floor to dry for several days before returning to seal the Terracotta using numerous coats of Tile Doctor Seal and Go which is an ideal sealer for Terracotta and provides durable stain protection together with a low sheen finish. Terracotta is by its nature very porous and so it’s not unknown for it to take up to nine coats of sealer, which can take some time to apply as like paint you have to wait until it’s dry before it will take the next coat.

Terracotta Tiled Kitchen Floor During Sealing Maidford

The customer was so impressed by the results I achieved in their kitchen they decided to go ahead and book me in to carry out this process throughout the whole of the ground floor which included lounge, study and hallway.

Terracotta Tiled Kitchen Floor After Sealing Maidford

 

Renovating a Terracotta Tiled Kitchen Floor in Northamptonshire

Terracotta Tiled Kitchen Floor Renovated at a Maidford Cottage Read More »

Victorian Tiled Hallway Floor Before After Restoration Kettering

Victorian Tiles Discovered Under Lino Renovated in Kettering

The customer called me after she had removed the lino in her hallway to discover a traditional Victorian tiled floor hidden underneath. Unfortunately, at some time in the past this floor hadn’t been protected whilst decoration was carried out and had been heavily stained with splashes of paint. Although the customer had tried her best to clean the paint off the floor, she had found it was impossible to remove. She was really keen to restore the floor back to its’ former glory and see the back of the nasty looking lino!

I visited the property in Kettering which is a lovely town in Northamptonshire, approx. 15 miles from Northampton itself. The area is now very popular with commuters with regular trains heading to London St Pancras taking just one hour. As the pictures she had sent me showed the floor needed professional cleaning as no amount of household products would be able to remove the problem areas. I discussed with the customer what we could do to get the floor restored and we agreed a price for the work, scheduling it in for a few weeks later.

Victorian Tiled Hallway Before Cleaning Kettering Victorian Tiled Hallway Before Cleaning Kettering

Deep Cleaning a Victorian Tiled Hallway Floor

To clean the floor, it was first sprayed with a solution of Tile Doctor Remove & Go which was left to dwell for fifteen minutes to help soften the paint. We then used our heavy-duty scrubbing machine with the appropriate attachments to scrub the floor. A little warm water was added to the solution on the floor to help remove the paint as the scrubbing was underway. Once done a wet vacuum was used to remove the slurry generated by the scrubbing process.

This process was repeated several times in the most stubborn areas to ensure the floor was as clean as possible. This action removed around 90% of the paint which was a huge improvement, but more work was required before it would meet my standards.

To further improve the condition of the tiles my next course of action was to apply Tile Doctors 100 and 200-grit burnishing pads to the floor with water to help lubricate. After each pad the find slurry that was generated was extracted off the floor using the wet vacuum. This process reconditions the surface of the Victorian tile and removed the remainder of the paint, it also cleaned the remaining areas that needed further attention leaving the floor spotless. I left the floor to dry overnight and arranged to return the following morning to complete the restoration with the application of a sealer.

Sealing a Victorian Tiled Hallway Floor

The customer wanted the floor to look natural so requested a matt finish sealer, also being an old floor without a damp proof membrane I specified the sealer should be fully breathable so moisture can pass up from the sub floor and not become trapped under the tile where it could cause problems. With these factors in mind we agreed on Tile Doctor Ultra Seal which ticks all these boxes.

As you can see from the after pictures, the restorative cleaning process really did the trick. The colours in the floor were now nice and clear and the floor looked as it should.
The customer was over the moon with the outcome, she had not expected the finish achieved to be as good.

Victorian Tiled Hallway After Cleaning Kettering Victorian Tiled Hallway After Cleaning Kettering

No matter how bad you think the floor is with the use of professional machinery and Tile Doctor products we can restore most floors to a high standard, which certainly in this case exceeded the customers’ expectations.

 

Professional Restoration of a Victorian Tiled Hallway in Northamptonshire

Victorian Tiles Discovered Under Lino Renovated in Kettering Read More »

Pitted Travertine Floor Tiles Before After Renovation Weston Favell

Pitted Travertine Kitchen Floor Tiles Filled and Polished in Weston Favell

Travertine floor tiles are very appealing and very hardwearing, but without the protection of a sealer to stop dirt becoming ingrained in the pores of the stone their appearance will degrade. Fortunately, this can be remedied as demonstrated in these pictures of a Travertine floor I recently polished at a house in Weston Favell, Northampton.

Travertine Tiled Floor Weston Favell Before Polishing

This owner of the property had called me out as their kitchen floor was looking very sorry for itself and he was concerned that a lot of holes were appearing which was making cleaning the floor difficult as dirt was getting trapped in the holes. I went over and carried out a test clean on two separate tiles in the kitchen and the customer was amazed at how clean they came up and especially the grout.

Travertine Tiled Floor Weston Favell Before Polishing

The kitchen was stunning, but unfortunately the state of the Travertine tiled floor was bringing down its overall appearance. Impressed with the test clean they were keen to get the whole floor renovated so we agreed a price and I scheduled the work in for the following month.

Cleaning and Restoring Travertine Tiled Kitchen Floor

I returned on the agreed data and made a start by protecting the kitchen units by removing the plinths and covering base units and the appliances with a protective film. We then commenced the cleaning process to remove surface dirt by cleaning with Tile Doctor Pro-Clean paying special attention to the grout lines. The holes in the Travertine were filled with a stone resin, mixing it to closely match the colours of the stone.

The resin was allowed to dry before starting to re-polish the Travertine using a set of Tile Doctor Diamond encrusted burnishing pads. These pads are applied individually to each tile in sequence starting with a coarse 400-grit pad before moving onto the 800-grit and finishing with the fine 1500 grit pad. A little water is used to lubricate the process along the way and the floor is rinsed in between each pad with the resulting residue extracted from the floor using a wet vacuum. The process takes some time, but it really brings up the polished appearance of the stone and the results are well worth the effort. After a final rinse the floor was inspected and then left to dry off fully overnight.

Sealing a Travertine Tiled Kitchen Floor

When we returned the next day, the floor had dried, and we were able to give the floor a final polish with a very fine 3000-grit burnishing pad applied with a little water sprayed onto the tile. Finally, the floor was then sealed with two coats of Tile Doctor Ultra-Seal which provides excellent protection without changing the colour of the stone to provide a natural look.

Travertine Tiled Floor Weston Favell After Polishing

The client was over the moon with the outcome and surprised at the improvement. They were left with a floor that would be easy to clean and maintain.

 

Professional Restoration of a Travertine Tiled Kitchen Floor in Northamptonshire

Pitted Travertine Kitchen Floor Tiles Filled and Polished in Weston Favell Read More »

Mosaic Tiled Edwardian Floor Cleaning Abington Park

Cleaning 100 Year Old Mosaic Tiles in Abington Park

My customer recently got in touch and requested a site visit to look at her hallway floor.
The Edwardian property was situated in the Abington Park part of Northampton which is an area is steeped in history, with the nearby Manor House said to have been the home of William Shakespeare’s daughter Elizabeth Bernard. The house has since been turned into a museum.

As you can see from the photos, the floor which was laid when the house was built over 100 years ago using small square brown and beige mosaic tiles in a repeating. Although in good physical condition for its age the floor was looking a little tired and had lost its lustre and vibrant colour. The hallway also had stained wood panelling on one side which was another original feature and the owner of the property was keen to maintain the period feel.

Edwardian Mosaic Tiled Hallway Floor Before Cleaning Abington Park

I discussed with the customer what we could do to restore the floor, explaining the process, timescale and of course the cost. She was happy to go ahead so we scheduled the work in without delay.

Edwardian Mosaic Tiled Hallway Floor Before Cleaning Abington Park

Cleaning an Edwardian Mosaic Tiled Hallway Floor

In order to protect the wall panels and keep the moisture in the floor to a minimum I decided to keep the use of cleaning products to a minimum. This is always a concern with these old floors which have no damp proof membrane as the use of too much water can lead to efflorescence salts appearing later. With this in mid I decided to clean the floor using Tile Doctor burnishing pads as these pads only require a small amount of water and no products, this would also have the benefit of slightly levelling out the surface of the tiles.

My first course of action was to vacuum the floor to ensure there was no loose debris followed by masking up the bottom of the stairs carpet to protect it. I then started the restoration process by using a coarse 100-grit Tile Doctor burnishing pad attached to a 17” industrial rotary machine and a small amount of water to lubricate the process. The 100-grit pad is quite an aggressive pad which removes deeply imbedded stains and as mentioned before a small amount of unevenness. To remove the resultant slurry the floor was rinsed with a small amount of water which was then extracted using a wet pick up machine. This process was then repeated with a 200-grit burnishing pad to smooth out any scratches and polish the tile ready for sealing.

Although it was a relatively small area, 12 square metres this process took the whole day as we work in small sections at a time. Moving the machine slowly with multiple passes over each area.

Sealing an Edwardian Tiled Hallway Floor

I returned the following day and assessed the floor to ensure we were happy with the result from the previous days cleaning. I also took damp meter readings and was pleased to see they were within normal expectations for a floor of this age. Next, I applied Tile Doctor Colour Grow Sealant which is a breathable sealant that will allow any moisture in the sub floor to rise though the tile. This particular sealer is a colour enhancing sealer that protects and improves the natural colours in the tile and leaves a lovely natural finish. The floor now has a much more even finish and will be much easier for the client to maintain in the future.

Edwardian Mosaic Tiled Hallway Floor After Cleaning Abington Park

The customer was very happy with the results and left the following feedback on the Tile Doctor feedback system.

“Great communication about the work planned and quotation. A super job in bringing my Edwardian mosaic tiled floor back to life. Would highly recommend this service”
Karen M”

Edwardian Mosaic Tiled Hallway Floor After Cleaning Abington Park

 

Professional Restoration of Mosaic Hallway Tiles in Northamptonshire

Cleaning 100 Year Old Mosaic Tiles in Abington Park Read More »

Polished Travertine Kitchen Floor Before and After Polishing Abthorpe Towcester

Travertine Floor Tiles Filled and Polished in Abthorpe Near Towcester

The following pictures show a polished Travertine kitchen and dining room floor at a house in the small village of Abthorpe near Towcester. The stone floor had lost its shine and had become dull and difficult to clean which was mainly due to the holes that had appeared in the surface of the Travertine where dirt had become ground in and trapped. This is a common problem with all Travertine stone, the holes are natural and usually filled at the factory but due to wear and tear over time and the use of acidic cleaning products the filler can become dislodged. The small holes gave the floor an unsightly appearance and become magnets to dirt.

Polished Travertine Kitchen Floor Before Polishing Abthorpe Towcester
We find the best way to restore the shine is to apply a set of diamond encrusted burnishing pads, they take off the layer of dirt and then slowly build a resilient polish on the surface; however, to get the best results we would need to fill the holes in the Travertine.

Polished Travertine Kitchen Floor Before Polishing Abthorpe Towcester

Burnishing and Cleaning a Travertine Tiled Floor

I gave the floor a sweep to remove any loose dirt and grit and started with the application of the first pad which is a coarse 400-grit and designed to remove minor scratches, old sealers and ingrained dirt. The pads fit a 17” buffer machine and is applied with water to lubricate the process, then once the pad has been applied to each tile the floor is rinsed with water and the resultant slurry is extracted using a wet vacuum.

Before moving onto the second pad in the set I gave the grout lines a clean with Tile Doctor Pro-Clean which was scrubbed into the grout using a stiff narrow brush. The pads can struggle to reach into the recessed grout lines, so I usually find this is the best way to get the grout clean.

Polished Travertine Dining Room Floor Before Polishing Abthorpe Towcester
The floor was given another rinse with water and then I continued to work through the medium 800-grit and then fine 1500-grit pads rinsing with water and then extracting the slurry with a wet vacuum after each pad.

The Travertine was now clean and after drying with fans I commenced the task of filling the holes with stone filler that matched the natural colour of the stone as close as possible, in this case the colour we opted for to achieve the best match was Straw. These activities took up most of the day so once I was done filling I left for the day, so the filler and floor could dry out thoroughly overnight.

Polished Travertine Holes Filled Before Polishing Abthorpe Towcester

Sealing a Travertine Tiled Floor

I returned the following day and started by completing the polishing process by applying the last 3000-grit very fine burnishing pad with the 17” rotary machine, the pad is applied dry with a small amount of water sprayed on the floor as you go along. With the floor now fully dry and the filled holes polished flat the last step was to apply the sealer which will protect the floor going forwards.

Polished Travertine Kitchen Floor After Polishing Abthorpe Towcester
With Travertine floors I usually recommend Tile Doctor Colour Grow which is a colour enhancing sealer or Ultra-Seal which is a natural look sealer. On this occasion the client preferred the natural look, so I applied two coats of Tile Doctor Ultra Seal and along with the previous polishing the floor now look transformed.

Polished Travertine Kitchen Floor After Polishing Abthorpe Towcester
 

Professional Travertine Tiled Floor Restoration in Northamptonshire

Travertine Floor Tiles Filled and Polished in Abthorpe Near Towcester Read More »

Honed Limestone Floor Before and After Restoration Upper Boddington

Honed Limestone Kitchen Floor Restoration – Upper Boddington, Daventry

The following photos show a recent job we undertook at a timber framed house in the village of Upper Boddington, just south of Daventry. The client was having a new kitchen installed but didn’t want to replace the floor as it was generally in good condition, just dull with some staining and general wear and tear.

As the photos show the kitchen units had already been removed and as the tiles were wall to wall this was an ideal time to have this work carried out as the kitchen was being reconfigured and the customer wanted the floor to look uniform throughout, we also included the hallway in the cleaning process.

Honed Limestone Floor Before Restoration Upper Boddington

Burnishing and Cleaning Polished Limestone Tiles

With tiles made of Limestone, Travertine, Marble and other high quality polished stone, we find that the best way to restore appearance is through a process known as burnishing and in the before photo you will see the specialised grinding and polishing equipment we use to achieve brilliant results and a professional finish.

Honed Limestone Floor Before Restoration Upper Boddington
As the tiles were worn and stained in the high traffic areas we applied Tile Doctor Pro-Clean which had been diluted and decanted into a pump-up sprayer. After leaving it to soak in for ten minutes it was scrubbed into the tile and grout using a rotary floor machine and a stiff brush. This was followed by washing and rinsing of floors with water and extracting the soil with a wet vacuum.

The next step was to apply a full set of Tile Doctor Stone Burnishing pads from 200 grit, 400 grit, 800 grit and finishing with 1500 grit for a honed look. We worked through the pads in 10 metre sections at a time lubricating with water and rinsing with water between each pad.

The kitchen and hallway floors were then allowed to dry out fully overnight.

Sealing Polished Limestone Tiles

The next day I returned to the property and completed the polishing process by applying the very fine 3000 grit burnishing pad with a little water and leaves a high shine finish.

The floor was then sealed with three coats of Tile Doctor Ultra Seal, which is a premium, natural look, impregnating sealer designed to provide maximum stain protection without altering the colour of the stone. The sealer takes an hour to dry and with three coats to apply it took most of the day to finish.

Honed Limestone Floor After Restoration Upper Boddington
The customer was happy with the results and left the following 5-star review on our site.

“Superb Service Chris P, Daventry”

Honed Limestone Floor After Restoration Upper Boddington
 

Professional Cleaning, Polishing and Sealing of a Honed Limestone Floor in Northamptonshire

Honed Limestone Kitchen Floor Restoration – Upper Boddington, Daventry Read More »

Pitted Travertine Before and After Filled Polished Rushden

Pitted Travertine Floor Tiles Filled and Polished in Rushden

Not only do we carry out the deep cleaning and restoration of all types of natural stone, we can also carry out repairs such as the filling of holes in stone, whether it be limestone, marble or as in this case Travertine. Travertine in particular is prone to a natural process of erosion know as pitting, this results in holes developing that easily fill up with dirt and muck over time and can be a real problem to maintain.

Pitted Travertine Before Filled Polished Rushden
This customer in Rushden called me in, as he felt the floor hadn’t been properly maintained since it had been installed twelve years prior and he was becoming concerned about the number of holes and pits that were appearing in the high traffic areas. The Travertine tiles had been laid in the hallway, kitchen and upstairs bathroom of the property but the problem was most apparent in the Kitchen.

Pitted Travertine Before Filled Polished Rushden

Burnishing and Cleaning a Travertine Tiled Floor

To get the floors clean and restore the polished appearance of the Travertine I decided to apply a set of Tile Doctor diamond encrusted burnishing pads. The process involves the application of four different pads applied in sequence from coarse to very fine, rinsing in-between each pad to remove dirt. As the floor had been installed in the Kitchen and the Hallway it made sense to split the work into two parts and work on each area separately.

The first pad is a coarse 400 grit pad that is attached to a rotary machine running at slow speed and with only water for lubrication. The pad is applied to the stone to removes minor scratches, sealers and dirt. It’s run over the entire floor and afterwards the floor is rinsed with water which is then extracted with the soil using a wet-vacuum.

I then repeated this same procedure with the second pad, which is a Medium 800 grit pad used to remove dirt from minor scratches and holes in the stone. After rinsing again, I went onto the third burnishing pad in the sequence which is a Fine 1500 grit pad that starts to rebuild the polish on the Travertine. I gave the floor another rinse and used the wet vacuum again to extract the water and soil from the floor. The last 3,000 grit super fine pad was then applied with a small amount of water sprayed onto the floor, this last pad really builds a nice shine on the stone.

Sealing a Travertine Tiled Floor

Once the burnishing process was completed the floor was left to dry off fully overnight and I came back the next day to continue with the work. I took a few moisture readings to confirm the floor was dry and then applied a single coat of Tile Doctor Colour Grow to seal the tiles. Colour Grow is a colour enhancing sealer that impregnates into the pores of the stone protecting it from within and improving the natural colours of the stone in the process. I particularly like to use it on Travertine as it really does bring out the brown shades in the stone.

Filling Holes in a Travertine Tiled Floor

Once the first coat of sealant had dried I started the work to fill the holes throughout the installation using appropriate colours of stone filler resin. I purposely delayed doing this until the first coat of sealer was in place in order to prevent excess resin from being absorbed into the tile and causing unwanted staining. There were quite a few holes to fill so it took a while to complete, the filler also needs several hours to dry and harden even when assisted with a fan. Excess filler is then polished off using a 17” rotary scrubbing machine fitted with a white polishing pad and any dust is carefully vacuumed up before applying a second coat of sealer. The floor was then allowed to dry before a final polish with a new 3000 grit pad to achieve a high sine finish.

Once the cleaning process was complete and the first coat of sealant had dried I then commenced the repair work by filling all holes throughout using appropriate colours of stone filler resin, the first coat of sealant is to stop the excess resin from being absorbed into the tile and causing staining, the filler is allowed to dry and harden for several hours assisted with a fan on site. Excess filler is then polished off using a 17” rotary scrubbing machine and a white buffing pad. Any dust is carefully vacuumed up before applying a second coat of sealant. This is then allowed to dry before a final polish with a new 3000 grit burnishing pad to achieve a deep sine finish.

Pitted Travertine After Filled Polished Rushden
I’m not sure the photographs really show off the transformation that I had managed to achieve, however my customer was certainly happy and left me the following glowing review via the Tile Doctor feedback system.

My hall and kitchen floor has been down for 12 years and has been a high traffic area. The Tile Doctor has literally made it look like new again. Holes filled, smooth, shiny and new again! My fully tiled bathroom has also been rejuvenated, wall tiles, shower tiles and floor tiles. The water now beads on the tiles like a freshly waxed car, and the walk-in shower has been perfectly resealed. Money very well spent.
Thank you so much! Mr.J. White, Rushden

Pitted Travertine After Filled Polished Rushden
It’s always nice to get feedback like that, it really does make your efforts feel appreciated.

Professional Travertine Tiled Floor Restoration in Northamptonshire

Pitted Travertine Floor Tiles Filled and Polished in Rushden Read More »

Black Limestone Shower Cubicle Before and After Cleaning Everdon Vilage

Removing Limescale staining from a Black Limestone Shower Cubicle in Everdon

Limescale deposits are a big problem in many parts of the UK where hard water is common. To remove it you need to use a strong acidic cleaner however what to do if you have limescale deposits on Limestone? As many may already know, Limestone is an expensive, high-quality stone that like a lot of natural stone is acid sensitive and can be damaged with the application of acid-based products.

Black Limestone Shower Cubicle Before Cleaning Everdon Vilage
You can use acids on Limestone however if your careful and I demonstrated this recently at a property in this village of Everdon near Daventry in Northamptonshire. My customer had a fantastic black Limestone tiled shower cubicle that had been absolutely ruined by white limescale staining and it had reached the point where the situation simply couldn’t be resolved with standard cleaning products.

Black Limestone Shower Cubicle Before Cleaning Everdon Vilage

Cleaning and Burnishing a Stained Black Limestone Shower Cubicle

As the staining was so severe, I opted to use Tile Doctor Acid Gel to clean the tiles. This is a blend of phosphoric and hydrochloric acids in gel form and is the best product for cleaning vertical services, since water based products just run off and don’t have time to work on the staining.

Working in small areas, I carefully scrubbed the product into the stone and then rinsed it off with plain water. This process was repeated across the whole cubicle, reducing the stains significantly in the process.

Next, I used a handheld polishing machine fitted with 6” diamond encrusted burnishing pads, along with some water for lubrication, to polish and deep clean the stone, removing any stubborn stains remaining on the tiles.

Sealing a Black Limestone Shower Cubicle

I left the cubicle to dry completely overnight. Upon my return the next day, I proceeded to seal the tiles using two coats of Tile Doctor Colour Grow sealer.

This sealer is impregnating, meaning it fils the pores of stone to protect against ingrained dirt and staining. As well as providing stone protection, Colour Grow also enhances the natural colour in the stone – in this case, the deep black shades in the Limestone.

Black Limestone Shower Cubicle After Cleaning Everdon Vilage
Having finished the job, I gave the very happy customer some advice on keeping limescale and other staining at bay in future. I explained that proper maintenance can be conducted by simply rinsing the tiles with clean water after each use of the shower, and by using Tile Doctor Aqua-Pro tile aftercare cleaner at least once a week.

Black Limestone Shower Cubicle After Cleaning Everdon Vilage
 

Professional Limescale Removal from Acid Sensitive Stone in Northamptonshire

Removing Limescale staining from a Black Limestone Shower Cubicle in Everdon Read More »

Victorian Tiled Hallway Floor Northampton Before and After Repair and Cleaning

Restoring a Victorian Tiled Hallway in Northampton

The photographs below are from a Victorian tiled hallway floor at a house in Northampton where I was called in by the owner to inspect the floor for restoration, deep cleaning and re-setting of all loose tiles covering around 3sq metres.

Victorian Tiled Hallway Floor Northampton Before Repair and Cleaning Victorian Tiled Hallway Floor Northampton Before Showing Loose Tiles

Cleaning Victorian Tiles

The initial process was to vacuum and remove any loose debris before applying Tile Doctor Oxy-Gel to the entire area. Oxy-Gel is a strong alkaline based gel cleaner/stripper which is safe to use on tile and grout and being gel based it’s very easy to control. The gel was left to get to work on the dirt for ten minutes before being scrubbed into the tile with a black stripping pad fixed to a rotary floor machine. The resultant slurry and dirt was then rinsed with water and removed using a wet vacuum. The floor now free of dirt and old sealers was now prepared ready for repairs and re-grouting.

Grouting Victorian Tiles

The next step was to remove small sections of loose tiles and then re-fixing and re-grouting as required. We took care to replace tiles into their original position to ensure they sat together correctly. Once the section was replaced I removed the tiles in the next section and repeated this process until the 3sq metres of loose tiles were all reinstalled.

Victorian Tiled Hallway Floor Northampton During Repair Victorian Tiled Hallway Floor Northampton During Repair

I allowed the grout to dry for a few hours before polishing off excess grout with a cloth and removing difficult grout smears with a weak solution of Tile Doctor Grout Clean-Up. The floor was then rinsed again using water to remove any trace of products and then dried using the wet vacuum.

Victorian Tiled Hallway Floor Northampton After Repair Closeup Victorian Tiled Hallway Floor Northampton After Repair Closeup

Sealing Victorian Tiles

I returned a few days later to ensure the floor was completely dry as dampness can be issue with this type of tile, I then vacuumed the floor and gave it a light clean with Tile Doctor Neutral Cleaner to make sure it was spotless before sealing.

Once the floor had dried I took damp readings and when satisfied the floor was dry again I applied three coats of Tile Doctor Colour Grow Sealant for a light sheen finish and to enhance the natural colour of the floor. Colour grow is a penetrating sealer that protects from within by soaking into the pores of the tile stopping dirt from becoming ingrained there, it also enhances colour.

Victorian Tiled Hallway Floor Northampton After Repair and Cleaning Victorian Tiled Hallway Floor Northampton After Repair and Cleaning

 

Victorian Tiled Floor Restoration in Northamptonshire

Restoring a Victorian Tiled Hallway in Northampton Read More »

Polished Limestone Floor Before Ater Cleaning Ashton Village

Polished Limestone Tiles Burnished and Restored Near Oundle

Limestone is known on the international market to be a stone of premium quality, durability and toughness, and Limestone tiles give any property a high-end wow factor when they are looking their best. To maintain that appearance however does require some work and this is where Tile Doctor is happy to assist.

This Polished Limestone tiled floor had been installed four years prior in the kitchen and living room of a house in Ashton Village, near Oundle in Northamptonshire. The tiles had lost their shine and the grout had become dirty and stained and the floor in general was proving to be increasingly difficult to clean.

Polished Limestone Floor Before Cleaning Ashton Village
This is a common problem with polished stone floors, the surface polish and sealer wear down over time allowing dirt to penetrate. At a loss with what to do to restore the appearance of the floor, the property owner called me in to give the Limestone a professional-level clean, seal and polish.

Polished Limestone Floor Before Cleaning Ashton Village

Burnishing and Cleaning Polished Limestone Tiles

With tiles made of Limestone, Travertine, Marble and other high quality polished stone, we find that the best way to restore appearance is through a process known as burnishing.

Our burnishing system involves the application of four different diamond encrusted pads. Working in small sections of between four and six square metres, I applied the first pad, which uses a coarse grit to remove light scratches and dirt, followed by a pad with a medium grit pad to prepare the floor for polishing. Next, I used the third pad with a fine grit to start the polishing process.

Before moving on to the fourth and final pad, I cleaned the grout lines using handheld brushes in combination with Tile Doctor Pro-Clean, which is a high alkaline tile and grout cleaner that is safe to use on tiled floor. The floor was rinsed and the soiled cleaning solution extracted using a wet vacuum.

Sealing Polished Limestone Tiles

Following this, I allowed the floor to dry completely overnight. Upon my return to the property the next day, I used the fourth pad, which uses a Very Fine grit is to give the stone a high shine finish.

The floor was then ready to be sealed with Tile Doctor Ultra Seal, which is a premium, natural look, impregnating sealer designed to provide maximum stain protection. This was allowed to dry for an hour, before I then re-polished the tiles to remove any excess sealer and to refine the finish the absolute best quality possible.

Polished Limestone Floor Ater Cleaning Ashton Village
The benefit of the burnishing pad system is that no chemicals are used (just a small amount of water for lubricant) so it is environmentally-friendly. I recommend the customer to use Tile Doctor Neutral Cleaner in the future to provide quick and effective maintenance. She was very pleased with the results and now she will be well-equipped to keep the floor in fantastic shape.

Polished Limestone Floor Ater Cleaning Ashton Village
 

Professional Tile Cleaning, Polishing and Sealing for a Polished Limestone Tiled Floor Restoration near Oundle

Polished Limestone Tiles Burnished and Restored Near Oundle Read More »

Travertine Kitchen Tiles After Cleaning Helmdon Close-Up

Badly Stained and Pitted Travertine Tiled Kitchen Floor Renovated in Helmdon

The following pictures show the amazing results that can be achieved with a badly stained and pitted Travertine floor. Covering an area of approximately 40m2 the tiles had been laid four years earlier in the Kitchen and Hallway of a house in Helmdon Village. The sealer had since worn off and dirt had become ground into the pores of the stone making it very difficult to clean effectively. Travertine does look amazing but does need to be sealed to keep it looking that way.

Travertine Kitchen Tiles Before Cleaning Helmdon
The first few photos show the floor before any cleaning was undertaken and the customers kitchen units which we had wrapped to protect against any splashing. We always take great carewhen working in peoples homes to avoid any damage and we advise that as much furniture as possible is removed from the area to be cleaned. In this case the client was unable to move the large table as they had nowhere to store it fortunately we carry specialist furniture sliders to allow us to move furniture backwards and forwards during cleaning so were able to work around it.

Travertine Kitchen Tiles Before Cleaning Helmdon Showing Pitting

Cleaning a stained Travertine tiled floor

The floor was cleaned using a combination of Tile Doctor Burnishing Pads and Tile Doctor Pro-Clean with a stiff brush to clean out embedded soil in the tile pits and grout lines, I also carried out some repairs to missing grout along the edges and around the oak beams to match the existing colours.

The Burnishing pads are applied individually to each tile in sequence starting with acoarse pad and finishing withthe fine pad. The floor is rinsed in-between each pad and the resulting residue extracted from the floor using a wet vacuum. The pads are encrusted with diamonds and are ideal for bringing back the finish of stone surfaces like Travertine.

Travertine Kitchen Tiles During Cleaning Helmdon
The picture above should give you an idea of the machinery required to achieve professional results.

Sealing a Travertine tiled floor

Before leaving for the day the floor was given a final rinse with water and as much water and moisture as possible was extracted from the floor using the wet vacuum. When we returned the next day the floor had dried and we were able to apply the sealer. On this occasion we used Tile Doctor Colour Grow was applied to both the Travertine tiles and the grout lines, not only will this protect both the tile and grout from staining Colour Grow also enhances the natural colour and beauty of the stone.

Travertine Kitchen Tiles After Cleaning Helmdon
The owner of the property was very happy with the result and left the following comment on the Tile Doctor feedback system, I always appreciate it when clients take the trouble to do that.

“Phil was at all times pleasant to talk to, professional in his approach and accommodating of our needs. Worked very well. Richard , Helmdon”

Travertine Kitchen Tiles After Cleaning Helmdon Close-Up
 

Stained and Pitted Travertine Kitchen Floor Restoration in Northamptonshire

Badly Stained and Pitted Travertine Tiled Kitchen Floor Renovated in Helmdon Read More »

Renovating Victorian Hallway Tiles in Finedon

Century-old Victorian Tiled Floor Rejuvenated in Finedon

Finedon is a small civil parish in Northamptonshire with a big history. At the time the Domesday Book was complete in the late 11th century, the town was, in fact, a large royal manor held by the wife of Edward the Confessor.

In subsequent centuries the town has experienced a rich history and many of the current houses were built during the Victorian period (1837-1901). It came as little surprise to me, then, to get a call from a customer in the town who had recently found an original Victorian tiled floor underneath the carpet in her house.

Victorian Tiled Floor Before Cleaning in Finedon
The tiles were well over a century old. They had been covered by carpet for several years at least, and once unearthed they are clearly covered in paint and other debris from renovation work that had been carried out. Naturally, the customer was keen to restore the appearance of the tiles and so she called me, the local Tile Doctor, to get the job done.

Cleaning an Original Victorian Tiled Floor

You can see from the photos above that the floor was in quite a state – it took a whole day to clean. The floor area was only around eight metres squared, but it took two litres of Tile Doctor Remove and Go and three litres of Tile Doctor Pro-Clean to get it clean. Remove and Go is a very strong stripper that will just about shift any type of dirt or stain, while Tile Doctor Pro-Clean is a reliable high alkaline cleaner both products are designed for use on natural stone.

Once all the dirt, stains and paint splashes were removed, I washed down the floor with fresh water to neutralise the chemicals. I then installed some equipment to assist the drying process overnight, allowing the tiles to be sealed the next day.

There were also some cracks and missing grout that I replaced, along with some several loose tiles that I refitted.

Victorian Tiled Floor During Cleaning in Finedon

Sealing an Original Victorian Tiled Floor

I returned to the property the next day to seal the floor. To do this I used two coats of Tile Doctor Colour Grow, which provides robust protection and the quality matte finish the customer had requested.

As the name suggests, it also enhances the natural colours in the tiles, restoring character to this original feature. For a more traditional look, one litre of sealer was sufficient.

Victorian Tiled Floor After Cleaning in Finedon
Looking at the photos, you can see the huge improvement made over two days of work. One hundred years of wear and tear alleviated in 48 hours! The customer was thrilled.

100 Year Old Original Victorian Tiled Hallway Restored in Northamptonshire

Century-old Victorian Tiled Floor Rejuvenated in Finedon Read More »

travertine tile after burnishing steverton

Burnishing Travertine Tiles To Restore Lustre in Staverton

Travertine is a highly coveted and popular choice for tiled floors – and it’s easy to see why. At peak condition, it’s one of the most beautiful and eye-catching types of tile that is available. However, the appearance of the stone tends to suffer heavily from a natural process of corrosion know as pitting, which results in small holes developing that easily fill up with dirt and muck over time. This ingrained dirt is particularly difficult to remove with domestic, supermarket-quality cleaning products.

This customer, who lives in Staverton, near Daventry in Northamptonshire, was very concerned that his Travertine tiled floor had lost its former lustre and shine due to pitting issues, continued foot traffic, and the fact that the sealant has lost its performance over the last few years and hadn’t been topped up. Dirt had therefore been allowed to penetrate both the grout and stone making it look dull and uninviting.

Travertine tile before burnishing Steverton Travertine tile before burnishing Steverton

A quote was issued and accepted to restore the floor to its former glory. It was agreed the work would best be carried out whilst the customer was away on a short break with his family.

Burnishing and Cleaning a Travertine Tiled Floor

I decided the best course of action to bring the floor back to its former glory would be to hone and polish the stone with Tile Doctor diamond encrusted burnishing pads. Our burnishing process involves removal of a very thin layer of the top surface of the stone using four pads of different grits.

The first pad has a Coarse 400 grit. It is attached to a rotary machine and, with only water for lubrication, removes minor scratches, sealers, and the top surface dirt. Working in small areas of four-six square metres each, I applied the pad across the the entire floor, rinsing in between eras and picking up the soiled solution with a wet-vac machine.

I then repeated this same procedure with the second pad, which is a Medium 800 grit pad used to remove dirt from minor scratches and holes in the stone. Next, I mixed up some Tile Doctor Pro Clean and sprayed it on the grout lines, which were only lightly soiled, and used hand brushes to clean them. The next burnishing pad I used had a Fine 1500 grit, which is used to start the polishing process.

Following the application of the first three pads, I stopped to allow the area to dry overnight. To get the best results with burnishing, it is best that the tiles are dry as otherwise you won’t achieve the highest level of shine possible. Returning the following day, I proceeded to apply the final Very Fine 3000 grit burnishing pad to achieve a very high quality polished finish.

Sealing a Travertine Tiled Floor

Once the burnishing process was completed, I applied two coats of Tile Doctor Ultra Seal to seal the tiles. Ultra Seal is a no-sheen, natural look impregnating sealer designed to provide maximum protection against dirt and stains. The second coat was allowed to dry for an hour before I re-polished the entire floor with a very fine 3000 grit pad to refine the polish even further.

The fantastic results can be seen in the photos below.

Travertine tile after burnishing Steverton Travertine tile after burnishing Steverton

The customer was very happy with the result, leaving the following feedback:

“Just wanted to thank you for an excellent job in cleaning and returning our dining room and kitchen floor to its former glory. It looks fantastic! The floor definitely benefits from a more honed/polished finish.”

It’s always nice to get feedback like that, it really does make your efforts feel appreciated.

Travertine tile after burnishing Steverton
 

Professional Travertine Tiled Floor Restoration in Northamptonshire

Burnishing Travertine Tiles To Restore Lustre in Staverton Read More »

terracotta tiles before and after grout haze removal in cogenhoe

Terracotta Tiled Kitchen Floor with Severe Grout Haze Problem Treated in Cogenhoe

This newly installed Herringbone-style Terracotta tiled floor in a refurbished kitchen was heavily covered with patches of grout haze. The customer, who lives in the town of Cogenhoe, Northampton informed me that the tiler had supposedly sealed the floor before grouting. If this was true, the grout haze should have been very easy to remove.

However, the tiler had clearly not been entirely truthful as, when I arrived at the property to carry out a test clean, I found very little evidence of any sealer whatsoever. Nonetheless, I found that the grout haze was easily removed using a solution of Tile Doctor Grout Clean Up, a concentrated phosphoric acid cleaner which is designed specifically for the removal of haze, mineral deposits and efflorescence.

Herringbone design terracotta floor before Cogenhoe Herringbone design terracotta floor before Cogenhoe

These Terracotta tiles were very pitted and the original tiler was correct to fill the small holes with grout to complement the rustic look of the tiles, but he should have taken the correct measures to ensure that a white misty grout haze didn’t appear over the whole area!

The customer was happy for me to proceed with restoring the floor, but also very concerned that her newly installed hand painted kitchen units would be damaged by the chemical cleaning products. I assured her that I would cover them up completely and carry out all work along the plinths by hand.

Removing Grout Haze from Terracotta Tiles

Once on site, I covered the kitchen units to protect them and proceeded to mix up a solution of Grout Clean Up. This was applied firstly around the edges of the floor and scrubbed into the stone by hand using a stiff brush.

Working in areas of four square metres each so as to not the leave the product on the floor too long, I applied the solution to pre-wet the floor ready for the next part of the process. This was to apply Tile Doctor Acid Gel, our blend of phosphoric and hydrochloric acids, leave it to dwell for a few minutes has then agitate it to neutralise and remove the copious grout haze. Once each area had been treated I rinsed it with water to remove any chemicals.

Herringbone design terracotta floor during Cogenhoe Herringbone design terracotta floor during Cogenhoe

Sealing Terracotta Tiles

With the entire floor treated, I installed a dehumidifier to help the tiles to dry quickly overnight. The next day I returned to the property to apply two coats of Tile Doctor Colour Grow sealer. This is an impregnating sealer which provides robust protection while also lifting the natural shades in the Terracotta.

Each coat was polished in by hand, leaving an hour for drying between coats. I then waited another hour before giving the whole floor a final polish with a buffing machine to remove any excess sealant.

Herringbone design terracotta floor after Cogenhoe Herringbone design terracotta floor after Cogenhoe

The result achieved in the space of 24 hours was fantastic and the customer was exceptionally pleased. Despite the severity of the grout haze problem, the combination of the right products allowed me to handily resolve it. The addition of a properly applied and top quality sealer will help to ensure the floor is protected from staining, something which is essential in a kitchen.

Resolving Installation Issues with a newly installed Terracotta Tiled Floor in Northamptonshire

Terracotta Tiled Kitchen Floor with Severe Grout Haze Problem Treated in Cogenhoe Read More »

Quarry tiles after sealing ringstead

350-Year Old Original Quarry Tiles Salvaged and Restored in Ringstead

It’s not every day that I get to work on a 350-year old property, however, not too long I was contacted by a client who was in the process of renovating one in the village of Ringstead, complete with an original Quarry tiled floor.

Quarry tiles before cleaning Ringstead
After removing the old flooring in the property, the client had discovered a broken-up screed of concrete covering the original tiles, the remnants of which can be seen in the photos below. He proceeded to manually scrape the screed off over the course of several days – successfully removing about 60 per cent of it – but found there to be many stubborn areas and instances where the tiles were badly cracked and would need replacing.

As a passionate renovator, the client treats restoring old properties as a labour of love, and only recruits professional help when he really needs it, so it was a real compliment to be consulted to see if the floor was salvageable. I’ve worked on floors in an equally bad state before so I was confident it could be restored, I provided a quote which was accepted and a date was agreed to start the work.

Cleaning 350-Year Old Quarry Tiles

Upon arriving at the property, my first course of action was to run my rotary machine, fitted with a dry concrete cleaning brush, over the entire area to remove dust and etch the area to allow the cleaning products to permeate the surface of the screed. I then vacuumed the area thoroughly before applying Tile Doctor Acid Gel across the entire area.

Quarry tiles before cleaning Ringstead
Acid Gel is a blend of phosphoric and hydrochloric acids in gel form which helps to remove inherent grout haze, efflorescence and other stubborn staining. The product was left to dwell for 20 minutes, before I repeated the action with the concrete cleaning brush to work the product into the tiles. Acid Gel was left on for a further 10 minutes and agitated with handheld brushes to clean the stone. Following this, the resulting cleaning slurry was removed with a wet-vac machine.

To complete the cleaning process, I used a long handled scraper to score along the top of the remaining concrete and break it down by applying Tile Doctor Grout Clean Up, which is essentially the liquid version of Acid Gel. I carried out this action twice to ensure the removal of all the concrete.

Quarry tiles after cleaning Ringstead

Sealing 350-Year Old Quarry Tiles

The floor was then allowed to dry for 4 days; properties of this age have no damp proof membrane to the this provided time to allow excess moisture to evaporate following the cleaning.

Returning to the property, I ran some quick deal tests to check that the Quarry tiles were ready to sealed. Once I was satisfied with the condition of the floor I proceeded to apply two coats of Tile Doctor Colour Grow, our impregnating, breathable sealant which offers provides robust protection and enhances the natural reddish shades in the Quarry.

Quarry tiles after sealing Ringstead
The client was very pleased with the results. Our work has helped him massively along the way to the complete renovation of this great property. His long-term plan is to keep the Quarry tiled floor as it is, however when he encloses the area under the stairs he will use the tiles from that area to replace cracked and damaged tiles that are in the centre of the room. If more tiles he intends to source them from a reclamation yard.

Quarry tiles after sealing Ringstead
 

Professional Restoration on a antique Quarry Tiled Floor in Northamptonshire

350-Year Old Original Quarry Tiles Salvaged and Restored in Ringstead Read More »

Sandstone patio slabs after cleaning Rushden

Stained and Damaged Sandstone Patio Restoration in Rushden

Lichen, moss and other plant-based staining is a common sight on patios exposed to the UK climate. For many property owners, it’s a very difficult task to keep patios looking great in the face of the natural effects of the environment. However always happy to help Tile Doctor is available to provide the professional cleaning and sealing needed on a regular basis.

This Sandstone tiled patio in Rushden was certainly a prime candidate for restoration. Not only was it completely covered in lichen and moss, but it was also cracked in parts and missing grout. The patio would therefore need not only cleaning and sealing, but also re-grouting.

Sandstone patio slabs before cleaning Rushden Sandstone patio slabs before cleaning Rushden

Cleaning a Stained and Damaged Sandstone Patio

To begin the restoration, I opted to power jet wash the entire area to remove as much of the initial layers of moss. Then, I mixed a strong dilution of Tile Doctor Pro Clean, which is a powerful and reliable alkaline cleaner suitable for use on both internal and external natural stone tiles. This was applied liberally to the patio and scrubbed into the stone to cut through the particularly stubborn stains. The two photos below show the fantastic result.

Sandstone patio slabs after cleaning Rushden Sandstone patio slabs after cleaning Rushden

Re-grouting and Sealing a Sandstone Patio

After completing the cleaning phase, I allowed the patio to dry completely overnight before returning to re-grout the entire area with mortar. To finish off I applied a fresh sealer in the form of Tile Doctor Seal and Go Extra, which an acrylic-based, fully breathable sealer appropriate for outside use.

The below pictures show the final result. As you can see, it was a complete transformation – and my very happy customer will agree! With the right products and methods, it’s possible to bring new life back to weathered patios.

Sandstone patio slabs after cleaning Rushden Sandstone patio slabs after cleaning Rushden

 

Professional Sandstone Patio Restoration Northamptonshire

Stained and Damaged Sandstone Patio Restoration in Rushden Read More »

Pitted travertine after repair Oundle

Polished Travertine Tiles with Pitting Issues Restored in Oundle

Although at first glance this Travertine tiled floor in Oundle appeared to be in decent condition, upon closer inspection however it became very clear that it was suffering from significant pitting issues and had become very dull for a polished stone. While they can’t necessarily be seen in the photographs, the floor had hundreds of small holes across the entire area, along with a few hairline settlement cracks in a few particular tiles.

It is natural for Travertine to become pitted and for small holes to appear over time. To give the stone a smooth appearance these holes are filled at the factory; however, in high traffic areas such as kitchens and living rooms these fillers pop out and the holes quickly fill with dirt and grime, making the floor grubby and difficult to clean.

Needless to say the property owner was keen to have the Travertine restored as quickly as possible to avoid the situation becoming worse.

Pitted travertine before repair Oundle

Cleaning a Travertine Tiled Floor

To begin the restoration, I needed to clean the whole floor to remove the dirt and muck that had become ingrained in the Travertine. I did this using our reliable high alkaline cleaner known as Tile Doctor Pro Clean, which I applied liberally and worked into the stone using the Tile Doctor diamond burnishing pad system, paying special attention to the grout lines.

There are four pads in the system and each burnishing pad is fitted to a rotary machine and ran across the floor in sequence starting with the coarse pad and finishing with the fine pad using a little water to help lubricate.

Pitted travertine during cleaning Oundle
Before applying the final polishing pad, I went round on my hands and knees and filled all the holes and cracks with an appropriate colour filler which did take some time to complete.

Pitted travertine during repair Oundle

Sealing a Travertine Tiled Floor

After allowing the new filler to dry overnight, I returned to the property to polish off any excess by hand with a cloth. Following this, I gave the tiles a final polish with the Very Fine diamond encrusted burnishing pad which gave the floor a uniform polished finish.

To protect the floor in the future the last step was to apply a fresh sealant in the form of Tile Doctor Colour Grow, a fanatic product for high-end tiles like Travertine, Limestone and Marble. Colour Grow is a colour enhancing, impregnating sealer which fills the pores in the stone to prevent trapped dirt and also emphasises the natural colours and shades in the process.

The tiles were then left to dry for two hours. I then opted to test for water repellency to check the sealant would provide adequate protection, with a successful outcome. The final picture below shows the finished results: clean, well-protected Travertine tiles with improved sheen.

Pitted travertine after repair Oundle
My customer was very pleased to have the pitting problem resolved, while also having the floor deep cleaned and sealed and left the following testimonial on the Tile Doctor feedback system.

Phil did an amazing job of repairing the holes and cracks and cleaning the pale coloured grout, which now looks like new. Lovely transformation. I have tried the Tile Doctor Stone Soap and this has given the floor a deep shine. I would gladly recommend Tile Doctor to anyone. Sonia A, Oundle

Professional Restoration of a Pitted Travertine Tiled Floor in Northamptonshire

Polished Travertine Tiles with Pitting Issues Restored in Oundle Read More »

Mouldy shower cubicle before and after Northampton

Mouldy Shower Cubicle Refreshed in Northampton

A common problem with bathroom and shower cubicle tiles is the appearance of mould on the tile, grout and silicone which if not tackled on a regular basis will spread and threaten to severely damage the appearance of the tiles, along with the silicone. This problem is usually due to inadequate ventilation however the good news is that with early intervention with Tile Doctor Mould Away spray the problem can be reversed.

The two photos below show a bad case of this very problem at a property in Northampton, where you can see that the grout and silicone sealant had become black with mould.

Mouldy shower cubicle before Northampton Mouldy shower cubicle before Northampton

Cleaning and Repairing Damaged Shower Cubicle Grout

Firstly, I decided to cut out the damaged grout with a hand held disc cutter and remove all the silicone at the base of the shower. To treat the less invasive mould in the rest of the cubicle I sprayed it with Tile Doctor Mould Away, which is specifically designed to remove mould from silicone and grout.

I sprayed the product onto the affected areas and left it to dwell for five minutes, before scrubbing it in with a stiff grout brush, resulting in a good clean. The area was then rinsed with plain water. Finally, I replaced the grout and the silicone that I had removed earlier with a flexible grout and a white silicone, both of which include a mould inhibitor.

Mouldy shower cubicle after Northampton Mouldy shower cubicle after Northampton

The photographs above show the end result. The customer was very happy with her refreshed tiles, and left the following feedback:

“Phil was brilliant – both when he came to look at the job and then when he returned to actually make the grout repairs. Most importantly he explained what was (and wasn’t possible) and did exactly what he said he would do. My shower area now looks brilliant and I’m no longer showering in fear of the tiles falling off the wall! Honest, clean, timely and totally professional. A tremendous job well done. Thank you.”

I left the customer with a bottle of Tile Doctor Aqua Pro to aid with regular cleaning. If used once or twice a week, this product will help maintain the condition of the grout. I also advised the customer that it is good practice to rinse the tiles down with plain water using the shower head after each shower to remove any soapy residue which can slowly discolour and stain grout over time.

Mouldy shower cubicle before and after Northampton
 

Professional Shower Cubicle Renovation in Northamptonshire

Mouldy Shower Cubicle Refreshed in Northampton Read More »

Victorian quarry tile cleaning St. Marys church

Restoring Victorian Quarry Tiles at St. Mary’s Church, Far Cotton

The following job was a bit different from the kitchen and hallway restorations we normally get asked to do, in fact this request came from the vicar of St. Mary’s Church in Far Cotton who wanted us to restore some beautiful old Quarry tiles which lead up to the main aisle. The church dates back to 1885 and given the wear on some of the tiles I can only assume they date back to the same Victorian period; the church is a really welcoming, community-focused place, so it was a pleasure for me to be asked to complete the work.

The vicar’s main concern was the large amount of melted candle wax around the font – so much so that this his normal cleaners had been unable to remove it. He also wanted to know if the floors could be sealed to make ongoing maintenance easier – and this was certainly something we would be able to provide. The following photos show the condition of the floor before we started.

Victorian quarry tile cleaning St. Marys church Victorian quarry tile cleaning St. Marys church

Cleaning Victorian Quarry Tiles

The next photo shows the work in progress from halfway down the aisle. We started by breaking down any old sealer and the troublesome candle wax, using a black stripping pad in combination of Tile Doctor Pro Clean to deep clean the floor. Since Pro Clean, a high alkaline cleaner, is highly versatile and can be used on all kinds of natural stone and tile.

While the church has cleaners that come in regularly to keep the building tidy for the parishioners, the old tiles really benefitted from a deep clean which tackled the stubborn ingrained dirt and staining that had built up over many years.

Victorian quarry tile cleaning St. Marys church

Sealing Victorian and Quarry Tiles

Once I was satisfied that the tiles had been cleaned to the best of my abilities, they were then left for two weeks to fully dry as it is an old church and, understandably, there were some inherent damp issues. As aforementioned, the vicar was keen to have the tiles sealed to make them easier to keep clean and protect them against ingrained dirt and staining for the future. There are only a few situations in which we wouldn’t recommend sealing tiles, such as if they are patio tiles which will already be under constant exposure to the weather.

The best choice of sealer for this particular situation was Tile Doctor Colour Grow, which is an impregnating, breathable sealer that won’t trap moisture in the floor and will provide great protection against further staining. Additionally, as an impregnating sealer, Colour Grow penetrates into the pores of the tile protecting it from within and with the added benefit of enhancing the natural colours and restoring the life and character back in the old, dull tiles. I applied it using a paint pad, before polishing it off.

I’m pleased to report that the restoration was a great success. The vicar was very impressed with the work, and I’m sure the church community will also be very happy with the new, vibrant tiles.

Victorian quarry tile cleaning St. Marys church Victorian quarry tile cleaning St. Marys church

 

Professional Quarry and Victorian Tiled Floor Restoration at a Northamtonshire Church

Restoring Victorian Quarry Tiles at St. Mary’s Church, Far Cotton Read More »

Patio Slate Tiles with Grout Haze Removed and Sealed in Brackley

Slate Patio Tiles Treated for Grout Haze and Sealed in Brackley

Along with internal tiled floors at residential and commercial properties, we also specialise in the cleaning, restoration and sealing of all types of external tiled floors, including patios.

This customer, who lives in the small town of Brackley in Northamptonshire, had made the unfortunate mistake of sealing a brand new Slate tiled patio without removing the layer of grout haze smeared across the surface of the tile first. With the grout trapped between the tile and the new sealant the sealer was unable to fulfil its potential and the entire floor appeared really dull and patchy. The customer contacted me about setting the situation right.

Patio Slate Tiles with Grout Haze Before Cleaning Brackley

Treating a Slate Tiled Patio for Grout Haze

My initial course of action was to remove the new sealer using Tile Doctor Remove & Go, which is specially designed to strip away sealant, as well as adhesives and paints in cases where building and decorating works have left the tiles stained. The product was applied liberally across the surface area of the patio and agitated using a rotary machine fitted with a special stripping pad. Of course, this was necessary because the grout haze could not be treated without removing the sealant first. The soiled cleaning solution was promptly soaked up using a wet-vac machine.

Once the tiles were exposed I applied Tile Doctor Acid Gel, which is a blend of phosphoric and hydrochloric acids in more manageable gel form, all over the patio and allowed it to dwell for ten minutes to begin neutralising the grout haze. I then added a little water and worked the product into the patio with a stiff scrubbing brush and a rotary machine to ensure all grout haze was removed from the surface of the tiles. The remaining slurry was then removed using the wet vacuum, and I rinsed the area twice with plain water to ensure all cleaning products had been removed. It was them left to dry completely.

Patio Slate Tiles with Grout Haze Being Cleaned in Brackley

Sealing a Slate Tiled Patio

I returned to the property several days later to give the patio a fresh seal now that it was free from grout haze. First, I gave the patio a vacuum and light mop to remove any dust and debris. The customer wanted the tiles as dark as possible, therefore I suggested we use Tile Doctor Stone Oil before sealing, as this would darken the Slate significantly.

Once this was agreed, I applied one coat of Stone Oil, allowed an hour for the product to dry, and then followed this applying two coats of Tile Doctor Colour Grow sealer. This is our impregnating, colour enhancing sealant which provides maximum protection against ingrained dirt and stains, as well as a durable no-sheen finish.

Patio Slate Tiles with Grout Haze Removed and Sealed in Brackley
As you can see from the photographs, the Slate tiles experienced an impressive transformation. The fresh sealant, combined with the Stone Oil, really took the appearance of the tiles to a new level and, what’s more, it will be easier for the happy customer to keep it clean in the future.

Restoring the Appearance of a Natural Slate Patio in Northamptonshire

Slate Patio Tiles Treated for Grout Haze and Sealed in Brackley Read More »

Grout Haze Removed From Slate Tiles Woburn Sands

Grout Haze Trapped Under Sealed Slate Tiles in Woburn Sands

These pictures are off a brand new slate floor which the customer assumed would be much darker after she sealed it. Her builder had informed her that she only needed to give them a wipe over to remove the grout haze after he had laid them which she did before sealing however she was disappointed as they came up lighter and patchy than she had envisaged from what she had seen in the shop. The colour and patchiness was down to the fact that not all the grout had been removed and was now trapped between the tile and the new sealant.

Slate Tiles with Grout Haze Woburn Sands Slate Tiles with Grout Haze Woburn Sands

Removing Sealer and Grout Haze from Slate

To be able to remove the grout haze which was the root cause of the problem I would need to first remove the sealer. Fortunately we have a product called Tile Doctor Remove & Go which can do this so I applied it to the tiles, let is soak in for tem minutes and then scrubbed it into the Slate using a rotary machine fitted with a stripping pad. I then rinsed the floor with water and removed the soiled solution with a wet vacuum, repeating the scrubbing process where I felt it was necessary.

Once this was done I could deal with the Grout Haze by giving the tiles an Acid wash using Tile Doctors new Acid Gel product which being in a gel form is much easier to control. It was applied all over the floor and allowed to dwell for ten minutes to work on the grout haze, I then added a little water and worked the product in with a stiff scrubbing brush and a rotary machine to ensure all grout was removed from the surface of the tiles; the resultant slurry was then removed using the wet vacuum again.

It was important at this stage to ensure any trace of Remove and Go or Acid Gel was removed from the slate before sealing so I then gave the floor a thorough rinse with more water using the wet vacuum afterwards to remove as much moisture as possible. Before leaving for the evening I installed a fan to blow air across the surface of the tiles to assist in the drying process.

Sealing the Slate Tiled Floor

I returned the following day and did a small test patch on a spare tile the customer had with a colour sealant and she wanted it darker than the sealant alone could achieve as colour enhancing sealers will only ever slightly darken the colour. Therefore I suggested we apply Tile Doctor Stone Oil before sealing as this would darken the slate to the colour the customer was after and it works especially well on darker tiles. Once this was agreed I applied one coat of Tile Doctor Stone Oil, allowed an hour for the product to dry assisted by a fan followed by 2 coats of Tile Doctor Colour Grow to fully protect the tiles.

Grout Haze Removed From Slate Tiles Woburn Sands Grout Haze Removed From Slate Tiles Woburn Sands

The job took two days, the grout haze is gone and the Slate now looks how it should, my customer was very pleased and left the following message on our feedback system.

Phil did an absolutely fantastic job on my black limestone tiles in my kitchen after my DIY botch job at trying to seal them. They now look like the floor I wanted to achieve when I bought those tiles in the 1st place. Thank you so much! Ms L. Whittaker.

Dealing with Grout Haze on a Slate Tiled Floor in Northamptonshire

Grout Haze Trapped Under Sealed Slate Tiles in Woburn Sands Read More »

Black and Red Quarry Tiles Welton After Cleaning

Colour Restored to a Faded Black and Red Quarry Tiled Floor in Welton

There are numerous factors that can contribute to a Quarry tiled floor looking worse for wear, including lack of sealer, dampness issues, and the wrong type of cleaning products. Unfortunately, this black and red Quarry tiled floor was suffering from a combination of all three: there was no sealer evident to protect against dirt and stains, and dampness in the sub-floor had caused the tiles to fade in colour and shine. The red tiles especially had faded so much that they appeared almost white.

Black and Red Quarry Tiles Welton Before Cleaning
The property owner, who lives in the town of Welton, near Daventry in Northamptonshire, was desperate to have the floor professionally restored as her efforts to clean the tiles with run-of-the-mill household products had gone unrewarded. To ensure the appearance of Quarry tiles in this high traffic area of the house, I would need to provide a deep clean and a robust, impregnating seal to prevent future damage.

Cleaning a Dirty Black and Red Quarry Tiled Floor

As is the case with most types of tiled floor in this condition, I deep cleaned this floor using our powerful alkaline cleaner, stripper, degreaser, Tile Doctor Pro Clean. The cleaning method involved spreading strong dilution of Pro Clean evenly across the floor and leaving it to dwell for a short period. This allows it to seep into the tile to help lift out and dissolve ingrained dirt.

I then agitated the solution with a scrubbing pad fitted to my rotary machine to ensure all layers of muck were removed, and then thoroughly rinsed the floor to remove the excess cleaning chemicals.

Sealing a Black and Red Quarry Tiled a Floor

Since the floor was suffering from particularly prevalent damp issues, I left it to dry for ten days (usually 24 hours will suffice) before I returned to the property to commence the sealing process. Arriving back at the property a week and a half later, I immediately took several damp meter readings to ensure the floor was dry enough for a sealant to be applied. This is incredibly important: the slightest quantity of outstanding moisture can cloud the sealant and damage its performance.

Thankfully the ten days had given the floor ample time to dry fully, and I went ahead with applying two coats of Tile Doctor’s impregnating, colour enhancing sealant called Colour Grow. As you can see from the second photo, the sealant really bought the depth of colour back to the floor, making it look very pleasing to the eye. The customer was especially pleased that the red tiles actually look red again!

Black and Red Quarry Tiles Welton After Cleaning
 

Professional Restoration of a Faded and Dirty Black and Red Quarry Tiled Floor in Welton, Northamptonshire

Colour Restored to a Faded Black and Red Quarry Tiled Floor in Welton Read More »

Chinese Slate After Cleaning and Sealing in Norton near Daventry

Complete Restoration of Chinese Slate Tiles in Norton near Daventy

This first photo shows a classic example of a poorly maintained floor, which had faded and lost its colour due to it not being maintained or sealed for many years. In this case, the tiles were Chinese Slate, and were proving very difficult for the property owner to keep clean due to the lack of sealer to protect against dirt and stains. The grout in particular was quite discoloured and of increasing concern to the owner, prompting up the decision to contact me about a restoration job.

Chinese Slate Before Cleaning in Norton near Daventry
I agreed to the work – consisting of a deep clean and the application of a new sealer – and travelled down to the property in Norton near Daventry in Northamptonshire to see what results could be achieved.

Cleaning a Dirty Chinese Slate Tiled Floor

My primary concern when approaching this challenging restoration was to clean the grout which as aforementioned, had become dirty and discoloured. Most tiled floor owners will understand the pain of keeping grout lines clean; regular professional attention is often the easiest solution.

In this scenario, the grout was cleaned using a strong dilution of the alkaline cleaner, Tile Doctor Pro Clean, mixed with warm water. This was applied directly onto the grout lines using a spray bottle and scrubbed in using a hand held grout brush, as shown in the second photo.

Chinese Slate During Grout Cleaning in Norton near Daventry
With the grout taken care of it was now time to turn attention to the Slate tiles themselves which I tackled with more Pro-Clean but worked in this time using a black scrubbing pad fitted to a rotary machine. This process also stripped away any traces of old, ineffectual sealers from the tiles. This process was followed by machine rinsing the floor with cold water to neutralise the chemicals in preparation for sealing.

Additionally, any particularly stubborn areas of old sealant were removed by hand brushes in combination with undiluted Tile Doctor Remove & Go remover. These areas were also rinsed to fully remove excess cleaning products.

Sealing a Chinese Slate Tiled Floor

I allowed the floor to dry completely overnight with a dehumidifier installed to assist the drying process. Upon my return to the property the next day I carefully checked the floor was completely dry, since even the slightest amount of excess moisture can cloud the fresh sealer and damage its performance.

Once satisfied that the floor was completely dry I applied five coats of Tile Doctor Seal & Go sealer to achieve a high shine finish, as per the customer’s request. This is the most popular finish for this type of flooring, as it its aesthetically pleasing whole with the assurance that the sealer is providing robust surface protection against stains and dirt.

Chinese Slate After Cleaning and Sealing in Norton near Daventry
The last photo shows the finished result with which the customer was extremely happy! Floors like this can so easily degrade into a terrible state without the right care so it’s always a great pleasure to make such a difference.

Professional Chinese Slate Tiled Floor Restoration in Northamptonshire

Complete Restoration of Chinese Slate Tiles in Norton near Daventy Read More »

Red Quarry Tiles Higham Ferrers Northants After

Extremely Dirty and Damp Quarry Tiled Floor Restored in Higham Ferrers

This red Quarry tiled floor was in the dining room of a house in the East Northamptonshire market town of Higham Ferrers. Despite being an original feature of the property, the floor had never been taken care of and looked to be completely beyond salvation and what must be the worst condition I have seen in a long time.

Red Quarry Tiles Higham Ferrers Northants Before
When I first inspected the floor it became very quickly clear that it was suffering from severe damp problems, covering roughly two thirds of the entire surface area. I took damp meter readings and discovered that the floor was saturated as there was no damp proof course installed. This problem was compounded by staining from the glue residue used to hold down the linoleum which previously covered the tiles. But while some floors look beyond salvation, I was certain I could restore this one to an acceptable appearance.

A hallway in the property had the same Quarry tiles, but these had been painted with a red tile paint at some point in the past, which itself had worn off in the main traffic areas. These tiles had no damp problems and so it would just be a case of removing the rest of the paint and providing a thorough cleaning before sealing.

Red Quarry Tiles Higham Ferrers Northants Before
The customer was also keen that the dining room be restored as near as possible to the hallway tiles to try and achieve a uniform finish. I did inform the customer that due to the vast difference in condition this would be a challenge but I would do my best. A quote was given and work was booked in at the customer’s convenience.

Cleaning Extremely Dirty Quarry Tiles

Before beginning the restoration, I carried out a patch test to see which products would achieve the best results on the tiles. After vacuuming and mopping the floor to remove the immediate layers of muck, I decided my best course of action would be to use the heavy duty stripper, Tile Doctor Remove & Go.

Working in four separate sections, I applied the product then scrubbed it using a black stripping pad to a rotary machine. Remove & Go is designed to break down old sealers, paints and glues, making it an ideal product for use in this particular situation. This area was then rinsed off with a wet-vac machine and the process was repeated on the rest of the floor.

I then inspected the floor and noticed a few shiny patches where the old sealer hadn’t been fully removed, so I tackled these stubborn areas by hand with a second application of Remove & Go. A final rinse was given to the whole floor to make sure no excess cleaning products remained.

Sealing Quarry Tiles

After completing the cleaning process and removing as much water as possible using a wet vacuum, I installed a dehumidifier and left the tiles to dry for an entire month. Upon my return to the property I took damp meter readings to ensure the tiles were fully dry prior to the application of the sealer. This is crucial as excess moisture can cloud the sealer, rendering it less effective at protecting the stone.

I opted to use Tile Doctor Colour Grow to seal the floor primarily because is fully breathable and therefore ideal for floors that are prone to damp problems. It has the added bonus of being a colour intensifying sealer that really enhanced the natural reddish shades in the Quarry.

Red Quarry Tiles Higham Ferrers Northants After
As the pictures show, there was a vast improvement in the floor and the customer was pleased with the results. It really goes to show that while a floor might look beyond salvation, wait can in fact be restored to an acceptable condition using the right methods and products. The customer was also given advice on maintenance of this type of floor to keep it looking its best for years to come.

Red Quarry Tiles Higham Ferrers Northants After
 

Professional Quarry Tiled Floor Restoration in Northamptonshire

Extremely Dirty and Damp Quarry Tiled Floor Restored in Higham Ferrers Read More »

Terrazzo Hallway Northampton After Cleaning

Heavily Soiled Terrazzo Hallway Restored in Northampton

This Terrazzo tiled hallway at a property in Northampton was in a really bad state. It was heavily soiled and suffered from glue marks where the original carpet covering it had been removed. Additionally, there was some damage to the edges of the doorway, and a large crack in the floor running across the width of the hallway.

Terrazzo Hallway Northampton Before Cleaning
Terrazzo is an interesting material, originally produced in Italy, that consists mainly of concrete with segments of marble and other stone interspersed and held together with a resin. Since Terrazzo is formed in this way, I explained to the customer that I would fill the crack along the floor and the small holes around the edges with concrete, before then using tile paint to match in the colours as best as possible. This would be the most cost-effective solution, which was ideal since the customer had a limited budget for the repairs.

Terrazzo Hallway Northampton Before Cleaning
Before beginning the restoration, I tested a small area using a diamond encrusted burnishing pad, thereby giving the customer an indication of the type of results that could be achieved. With the customer pleased by the results, the job was booked in for the following week.

Terrazzo Hallway Northampton Before Cleaning

Cleaning and Burnishing a Soiled Terrazzo Tiled Hallway

To begin, Tile Doctor Remove & Go was applied to the floor and was left to dwell for ten minutes to soften the carpet glue and break down any old sealer. This was then scrubbed in to the tiles with a pad fitted to a rotary machine. To remove the remaining residue and marks in the particularly stubborn areas, I used a manual hand scraper. The entire floor was then wet vaxed to soak up the soiled cleaner and leave the area clean for burnishing.

This was followed by the use of Tile Doctor diamond encrusted burnishing pads to polish the tiles, starting with a coarse grit pad, followed by wet vaxing and repeating the process with a medium grit pad and finally the fine grit pad to achieve the desired effect. I then installed a turbo dryer to dry the floor.

I returned to the property once the floor was dry and carried out the repairs which had been discussed earlier with the customer (filling the holes and cracks in the floor with concrete), cleaning off any concrete residue before I finished for the day.

Sealing a Terrazzo Tiled Hallway

Upon my return to the property the next day, I refined the polish on the floor even further by applying the extra fine grit burnishing pad.

Terrazzo Hallway Northampton After Cleaning
To finish off the three day restoration, I sealed the Terrazzo tiles using two coats of Tile Doctor Colour Grow sealer. As an impregnating sealer, Colour Grow soaks into the pores of the stone, protecting it from ingrained dirt. Colour Grow also contains colour intensifying properties, allowing it to enhance the naturally occurring shades in the stone, and therefore stopping it from appearing dull.

Terrazzo Hallway Northampton After Cleaning
This floor certainly was in a bad state, with damage as well as dirt to deal with, but I’m pleased to say that the work went a long way in transforming its appearance, leaving a very happy customer.

Terrazzo Hallway Northampton After Cleaning
 

Professional Terrazzo Tiled Floor Restoration in Northamptonshire

Heavily Soiled Terrazzo Hallway Restored in Northampton Read More »

Sandstone Kitchen Floor After Sealing Brockhall

Heavily Soiled and Stained Sandstone Kitchen Tiles Cleaned and Sealed in Brockhall

Tiled floors are a popular choice for people with large household pets – particularly dogs. Compared to carpeted floor they are hard wearing and reasonably easy to keep clean, with the right methods. At this property near the Northamptonshire village of Brockhall, my customer’s Sandstone tiled floor had been very badly stained thanks to her two large dogs – a problem exacerbated by the fact that the tiles had not been professionally cleaned or sealed for a very long time.

Sandstone Kitchen Floor Before Cleaning Brockhall
If you have read some of my previous posts you may remember a post detailing the cleaning of a large Sandstone patio with swimming pool, well this kitchen belonged to the same customer, who was so impressed by the results that he opted to have the kitchen cleaned as well.

Cleaning a Heavily Soiled Sandstone Tiled Kitchen Floor

As the photographs below show, my first course of action was to apply Tile Doctor Remove & Go to the edges of the floor. Remove & Go is a powerful stripper designed to break down layers of old sealer and dirt, along with any adhesive and paint marks. It can be used to great effect on most types of natural stone floor.

Sandstone Kitchen Floor During Cleaning Brockhall
I did this before I unloaded the rest of my equipment, since the product needs time to dwell. The edges were then cleaned carefully by hand so as not to damage the customer’s painted kitchen units.

Following this, I divided the room into four separate sections and, working one section at a time, applied Remove & Go before agitating it with a black stripped pad fitted to a rotary machine. The resulting slurry was promptly soaked up using a wet-vac machine.

Sandstone Kitchen Floor During Cleaning Brockhall
Certain areas proved particularly difficult to get clean, so in these cases I repeated the process once over, before following up with an application of Tile Doctor Pro Clean, worked into the stone with a scrubbing brush on the rotary machine. I rounded off the cleaning process with a second wet-vaxing.

Sealing a Sandstone Tiled Floor

After being thoroughly cleaned, the floor was left to dry, with process being sped up using an industrial fan left on site overnight. Adequate drying is essential as excess moisture can damage the performance of freshly applied surface sealer.

I returned to the house the next day and ran some quick tests to check the floor had dried completely. Then, to accentuate the subtle natural shades in the Sandstone, I sealed the floor using two coats of Tile Doctor Colour Grow. This colour intensifying sealer improves the appearance of natural stone one step further, while also providing a long lasting and robust surface seal.

Sandstone Kitchen Floor After Sealing Brockhall
It is also important that Colour Grow can provide a matt finish, as a sealant which offers a gloss finish would not have been as hard wearing, especially with two large dogs roaming around.

Sandstone Kitchen Floor After Sealing Brockhall
My customer was very pleased with the results. He can now enjoy his great looking Sandstone tiled kitchen floor, reassured in the knowledge that its rejuvenated appearance will be protected long-term against future dog-related stains and soil.

Restoring a Heavily Soiled Sandstone Tiled Kitchen Floor Brockhall

Heavily Soiled and Stained Sandstone Kitchen Tiles Cleaned and Sealed in Brockhall Read More »

Sandstone Patio Brockhall After Cleaning

Large Sandstone Patio and Swimming Pool Area Cleaned in Brockhall

As the summer slowly approaches thoughts turn to sorting out those outside areas ready for use again, so it’s about this time of year I get asked to look at cleaning external tiled surfaces such as patio areas driveways. These external surfaces suffer from a heavily build-up of soils due to the general wear and tear caused by exposure to harsh weather conditions. We have all the high pressure equipment and fantastic results can be achieved by pressure washing in combination with quality products.

The photographs below were taken in January at a lovely property in the small village of Brockhall, near the market town of Daventry in Northamptonshire; my customer has a large Sandstone tiled patio and swimming pool area and as you can see the weather had certainly taken its toll and it was now in need of a thorough deep clean.

Sandstone Patio Brockhall Before Cleaning Sandstone Patio Brockhall Before Cleaning

Sandstone is typically a hard wearing tile, but if neglected for a long time it can, much like any other type of stone, very easily lose its appearance without regular maintenance.

Pressure Cleaning a Sandstone Flagged Swimming Pool Area

My first thought when dealing with swimming pool areas is to protect the pool from contaminates thrown up by the cleaning process, fortunately in this case the pool was well secured with a black cover which was tightly strapped down.

Sandstone Patio Brockhall Before Cleaning
The next step was to deal with the particularly stubborn areas of dirt with an application of a high alkaline cleaner, known as Tile Doctor Pro Clean. Being an alkaline based product Pro-Clean is suitable for use on many different types of natural stone tiles, including Sandstone, Granite, Limestone, Slate and Travertine, and can be applied to both internal as well as external surfaces.

The cleaning solution was applied to the problem areas agitated so it could get to work on the dirt. This was then followed up with the application of a special circular pressure washing spinning tool running at very high pressure.

Sandstone Patio Brockhall During Cleaning Sandstone Patio Brockhall Cleaning Equipment

I have a truck mounted pressure system on the van however in this case it was easier to use a standalone industrial petrol jet washer to drive the spinning tool.

Sandstone Patio Brockhall During Cleaning
The spinning tool allows the water to be applied under high pressure, and removes dirt and stains at the same time.

Sandstone Patio Brockhall After Cleaning
As you can see from the photographs, the results achieved were amazing. My customer was so impressed, in fact, that he booked me in to restore his Sandstone tiled kitchen as well the following week!

Sandstone Patio Brockhall After Cleaning
 

Professional Cleaning of a Heavily Soiled Sandstone Patio and Swimming Pool Area in Northamptonshire

Large Sandstone Patio and Swimming Pool Area Cleaned in Brockhall Read More »

Quarry Tile After Cleaning Thrapston

Cleaning and Sealing Quarry Tiles with Damp Issues in Thrapston

This property was situated only a few hundred yards from the River Nene in Thrapston, near Kettering in Northamptonshire. And, while it is certainly nice to live next to a river, it can cause long running damp issues for certain properties, as was the case with several houses along this road. I was particularly aware of this, having treated a floor in a similar area of the town.

This client had recently uncovered a Quarry tiled floor which had remained hidden under Linoleum for a long time. She wanted professional help and advice on restoring the floor back to looking its best, and was especially aware that it was marked by white patches of efflorescence (mineral salts).

Quarry Tile Before Cleaning Thrapston Quarry Tile Before Cleaning Thrapston

I explained to the client that the damp issues can never be completely rectified without building work being undertaken to install a damp proof membrane. Unfortunately, this is a very expensive process. Nonetheless, the following is an account of the results which can be achieved with badly stained Quarry tiles using professional methods and products.

Cleaning a stained Quarry tiled floor

I arranged a date to do the work on my return the first stage in the floor restoration was to give the tiles a deep clean. This was done with a high alkaline cleaner known as Tile Doctor Pro Clean, which is applied to the floor and left to dwell for a short period, before being agitated with black stripping pad fitted to a rotary floor buffing machine. This strips away any old sealer and lifts away trapped dirt. The soiled solution was then rinsed away using clean water, and the resulting slurry was soaked up using a wet vacuum.

Quarry Tile Before Cleaning Thrapston
Following this I gave the floor an acid rinse with Tile Doctor Grout Clean-Up in order to neutralise the mineral salts. Then, to draw the contaminants completely out of the tiles – and to assist with the cleaning process – I applied the heat of a steamer.

To complete the cleaning process the floor was rinsed down again which was again was removed with a wet vacuum which extracted as much water from the floor as possible. I then installed a powerful industrial dehumidifier and allowed two weeks for the floor to dry completely. However, I was aware that given the extent of the damp issues that this might not, in fact, be long enough.

Upon my return to the house, I took further damp meter readings to discover that the floor was indeed still damp. I suggested that the best course of action in this scenario was for my client to carry out daily mopping with a mild acid solution of Tile Doctor Grout Clean-Up for a period of three weeks to help tackle the inherent salt issues that had been present for many years.

Sealing a Quarry tiled floor

After the three weeks had passed, I was able to apply just a single coat of Tile Doctor Colour Grow, which is a breathable impregnating sealer that allows for effective moisture vapour transmission. It also contains colour intensifying properties to help enhance the natural shades in the Quarry stone.

Quarry Tile After Cleaning Thrapston Quarry Tile After Cleaning Thrapston

The client also purchased some Colour Grow sealer for her to apply herself later in the Spring, as the floors were still too damp for the two to three coats that I would normally apply.

The photographs show what can be achieved with Quarry tiles suffering from inherent damp issues. Although they may still look slightly patchy, rest assured that by the Spring they will have dried out sufficiently enough to apply more sealant – this will achieve the desired finish.

Dealing with Damp and Stained Quarry Tiles in Northamptonshire

Cleaning and Sealing Quarry Tiles with Damp Issues in Thrapston Read More »

Limestone Tiles Kislingbury After Cleaning

Poorly Sealed Limestone Tiled Floor Restored in Kislingbury

The owner of this house in the town of Kislingbury, Northampton called me in because her sealer wasn’t performing very well and the floor had only been cleaned and sealed 6 months previous by her builders contractor. Although the rest of the floor was in very good condition there were quite a few tiles that were being easily scratched from day to day use and stained from liquid spills which should have been easy to remove.

Limestone Tiles Kislingbury Before Cleaning
It isn’t always the case that a whole floor is in poor condition, it can be just the high foot traffic areas or just a few damaged tiles either way it can spoil the appearance of the entire feature.

Limestone Tiles Kislingbury Before Cleaning
Upon initial contact with my client, we talked through the work the previous contractors had carried out. Then, upon testing the affected areas of the floor, I discovered that that the sealant had been applied very patchily, meaning it had better coverage in some areas than others. I also speculated that the underfloor heating in the room may have affected the curing of the sealant as it dried.

Cleaning a Limestone Tiled Floor

Even though this work was carried out in January, with outside temperatures of -2 degrees, I insisted that the underfloor heating was turned off to eliminate the potential of it impacting the performance of any products used during the restoration.

I began by stripping off all of the old sealer with the coarse pad from the Tile Doctor burnishing system. I then diluted a solution of the high alkaline cleaner Tile Doctor Pro Clean and this was mainly applied to clean the grout lines because as I previously mentioned, the condition of the tiles was generally speaking very good. The solution was allowed to dwell for approximately ten minutes, before I proceeded to agitate the area with a scrubbing brush to remove ingrained dirt. The floor was then finished off using the rest of the pads in the burnishing pad system to restore the surface shine and then rinsed down with water to remove the slurry.

Sealing a Limestone Tiled Floor

After allowing the floor adequate time to dry, I sealed it with Tile Doctor Colour Grow, an impregnating sealer which provides not only a durable surface seal, but also contains properties which intensify the natural colours in the Limestone.

I completed the seal with the underfloor heating off and this allowed the sealer to cure properly. Just to make sure, I also tested several different areas for water repellency – it was only after that I allowed my client to put the heating back on!

Limestone Tiles Kislingbury After Cleaning
The photos really show the difference made in the appearance of those areas of the floor that were once stained. Needless to say that the several days of work were really worth it to get this Limestone tiled floor back to looking its best. With a deep clean and robust, properly applied sealer, this floor will be protected against damage for a long time to come.

Limestone Tiles Kislingbury After Cleaning
 

Cleaning and Sealing a Limestone Tiled Floor in Northamptonshire

Poorly Sealed Limestone Tiled Floor Restored in Kislingbury Read More »

Limestone Tiled Conservatory Grafton Underwood After Polishing

Cracked Limestone Conservatory Floor Restored in Grafton Underwood

Here is a job I completed late last year in the charming tranquil village of Grafton Underwood Flagstone tiled Living Room which you will find I have written about previously.

This second floor was Polished Limestone that had been laid in their conservatory. The floor was not only was in dire need of a thorough clean and fresh seal, but was also suffering from cracks in some areas.

Limestone Tiled Conservatory Grafton Underwood Before Cleaning Limestone Tiled Conservatory Grafton Underwood Before Cleaning

Repairing a Limestone tiled conservatory

My first task was to address the multiple cracks in the floor, which I repaired by filling with a colour matching filler.

Limestone Tiled Conservatory Grafton Underwood Before Cleaning
I also managed to remove some displeasing rust marks ruining the appearance of the floor by using Tile Doctor Rust Away. Rust Away is used to remove embedded rust stains on any type of Stone or Clay-based tile.

Limestone Tiled Conservatory Grafton Underwood Before Cleaning Limestone Tiled Conservatory Grafton Underwood After Polishing

Cleaning a Limestone tiled conservatory

I then gave the conservatory floor a thorough clean, focusing first on the grout with Tile Doctor Pro Clean, a high alkaline cleaner that’s safe to use on Tile, Stone and Grout.

The Limestone tiles were then cleaned and re-polished with Tile Doctor Diamond encrusted burnishing pads. I started with the Coarse burnishing pad to remove dirt and old sealer before moving through the other pads from Medium to Fine, stopping to lubricate and rinsing the area with a little water after burnishing with each pad.

Sealing a Limestone tiled conservatory

After completing the clean, I left the conservatory to dry fully overnight. Upon my return to the house the next day, I ran damp tests to confirm the floor was dry enough to take the sealant, and then proceeded to seal the tiles with two coats of Tile Doctor Colour Grow.

Limestone Tiled Conservatory Grafton Underwood After Polishing Limestone Tiled Conservatory Grafton Underwood After Polishing

Colour Grow is a sealant which offers a robust surface seal, while also enhancing the natural colours in the stone. It also offers an aesthetically pleasing matte finish, which is exactly what my client had requested. My client also left the following message on the Tile Doctor feedback system.

Everything carried out when promised and with due consideration and explanation. Likely to have more work done next year.

Repairing, Cleaning and Polishing Limestone Conservatory Tiles in Northamptonshire

Cracked Limestone Conservatory Floor Restored in Grafton Underwood Read More »

Victorian Tiles–Stamford after sealing

Cleaning and Sealing a Victorian Quarry Tiled Hallway Floor in Stamford

This hallway floor was actually at a house in the town of Stamford which is just over the northern border of Northamptonshire and slightly out of my area; however I was recommended to the owner by another client which is always welcome and a testimonial in itself. I work right across the county so it wasn’t long before I was in the general area and arranged a visit to carry out an inspection of the Victorian Quarry tiled floor and provide a quote for a full restoration.

The owner of the house had just moved in recently and although the floor was in good overall physical, it was in need of a thorough clean and new seal to bring back some life to the tiles. Additionally she was having lots of other building work done to the house and she wanted to retain this as an original feature of the property. My quote was accepted and I was able to book the work in for the following week.

These first photos show how dull the floor looked due to a build-up of builder’s dust and general wear and tear. They also show some of the equipment needed to undertake the following cleaning process.

Victorian Tiles Stamford Before Cleaning Victorian Tiles Stamford Before Cleaning

Cleaning a Victorian Tiled Hallway Floor

I used a brush and vacuum to remove as much loose debris and dust from the surface of the floor as possible. I then applied a strong dilution of Tile Doctor Pro Clean to the floor which is a strong alkaline cleaner which can also be used to remove sealers; the solution was left it to dwell for roughly ten minutes before agitating it with scrubbing pads and brushes to remove the muck that was lifted to the surface. This was then wet-vacuumed twice to remove all the slurry and neutralise any chemicals.

Victorian Tiles Stamford Before Cleaning
As it was such an old property I then used a steamer to heat up the tiles and draw up any contaminants and assist with the drying process. I also chose to install two fans and a dehumidifier to dry the floor even further.

Victorian Tiles Stamford After Stripping and cleaning
With the cleaning process complete – and achieving a marked difference to the appearance of the floor – I left the tiles to finish drying for 24 hours.

Sealing a Victorian Tiled Hallway Floor

Upon my return to the house, I checked for any excess moisture by running damp tests as this has the potential to affect the performance of the sealer. Once satisfied with the results, I sealed the floor with two coats of Tile Doctor Colour Grow, a colour enhancing sealant which offers both a robust surface seal and an aesthetically pleasing finish.

I also carried out water repellency tests to ensure the sealer was working as expected and the floor had sufficient protection and will be hard-wearing for a hallway which is a high traffic area.

Victorian Tiles Stamford After Cleaning Victorian Tiles Stamford After Cleaning

On my client’s return to the house she was very happy with the final results – in fact, she was also in contact about some further work in the New Year!

Professional Victorian Quarry Tile Floor Stripping, Cleaning and Sealing

Cleaning and Sealing a Victorian Quarry Tiled Hallway Floor in Stamford Read More »

Victorian Tiles After Restoration Northampton

Restoring a Victorian Quarry Tiled Hallway in Northampton

Here’s a job I completed just before Christmas last year, at a house in Northampton which has a rich history and mix of architectural styles. The run up to Christmas is always popular as people try to get their household projects finished off in time for celebrating the festive season with family so this is always a busy time for Tile Doctor.

The photos below show a neglected Victorian Quarry tiled floor in need of repair, with cracked tiles along the edges. These were caused by somebody in the past using brute force to remove carpet gripper rods which had been glued to the tiles. These cracks were present around the edges of the entire hallway, however; this particular type of tile is very hard to get hold of. Furthermore, it is a costly process to replace the tiles as the skirting boards would have had to have been removed.

Victorian Tiles Before Cleaning Northampton
As well as the physical issues the floor had a dull appearance due to the build-up of builder’s dust and the general wearing down of the paintwork over time. I agreed with the client that the best course of action would be to fill the tiles, and paint the damaged tiles using a colour that matched as close as possible. Many of my Tile Doctor colleagues would disagree with this approach opting to source the correct tile and rebuild the damaged section however unfortunately in this case we didn’t have the time or the budget.

Victorian Tiles Before Cleaning Northampton

Cleaning and Repairing a Victorian Quarry tiled floor

My first action was to use a brush and vacuum to remove as much loose debris and dust as possible. I followed this by agitating the tiles with a dilution of Tile Doctor Pro Clean which is a strong alkaline product and safe to use on tile and stone. I use a combination of a coarse burnishing pad fitted to a rotary machine and hand held brushes, in order to get the floor clean. The resulting slurry was then rinsed and removed using a wet vacuum. This process was repeated twice followed by a thorough rinse to ensure any trace of cleaning agent had been removed and the floor neutralised.

Victorian Tiles During Cleaning Northampton
As this was such an old property, I then used a steamer to heat up the tiles in order to draw out any contaminants and assist with the drying process. I installed a fan to dry the floor before starting repairs, mixing up some coloured grout and filling all holes and cracks along the edges, including the doormat area.

Victorian Tiles During Repair Northampton Victorian Tiles During Repair Northampton

I allowed the coloured grout to dry overnight, before hand painting the black and Terracotta tiles. These were then given time to dry (about a couple of hours). Following this, I carefully painted in the other colours: brown and cream. The overall effect was quite convincing and you had to look very closely to notice.

Victorian Tiles Before Painting Northampton Victorian Tiles After Painting Northampton

Sealing a Victorian Quarry tiled floor

Due to the fact that there were other tradesmen working in the house at the time, the floors were sheeted up to protect from additional dust and muck. I then left the house for a week, allowing the floor ample time to dry completely in preparation for sealing.

Upon my return, I took damp meter readings, and once satisfied with the dryness of the tiles, I began the sealing process with the impregnating, colour-enhancing sealer Tile Doctor Colour Grow. The sealer provides both durable surface protection and an aesthetically pleasing matte finish.

The below photos show how the product has enriched the colours with the two coats applied.

Victorian Tiles After Restoration Northampton Victorian Tiles After Restoration Northampton

The process of restoring this wonderful Victorian Quarry tiled floor was certainly time consuming, but very rewarding. I am exceptionally pleased with the results myself, and my client couldn’t have been happier and I’m sure the newly revitalised hallway will have been a talking point for all their visitors during the Christmas break.

Victorian Tile Repairing, Cleaning and Sealing in Northamptonshire

Restoring a Victorian Quarry Tiled Hallway in Northampton Read More »

Grout Haze Removal from Sandstone Wappenham

Sandstone Tiled Floor Treated For Grout Haze in Wappenham

It’s not that uncommon for newly installed tiled floors to suffer from grout haze. This occurs where builder or tiler fails to remove all the excess grout from the surface of the tile after installation. It’s not always immediately obvious as the grout has to dry before it shows up and if the tiles are sealed afterward the grout is trapped on the surface of the tile under the sealer which makes it even more difficult to remove. Not too long ago, I was called to address this exact problem experienced on my client’s Sandstone tiled floor at her house Wappenham, Northamptonshire.

This first picture shows how the builder had left the floor after sealing (note how all the tiles have a similar colour). Also shown in the picture is the equipment I use to remove grout haze should you wish to do this yourself.

Grout Haze Removal from Sandstone Wappenham
The second picture shows a close-up of the white grout haze deposits on the surface of the tile; the issue is probably difficult to appreciate if you haven’t come across this type of problem yourself however you will find ordinary household cleaning products will be largely ineffectual.

Grout Haze Removal from Sandstone Wappenham

Removing Sealer from Sandstone Floor Tiles

The third picture shows the first stage of the cleaning process which required stripping off the sealer so I could then treat the Grout Haze. To do this I applied Tile Doctor Remove & Go liberally across the floor, before agitating with a black stripping pad fitted to a rotary machine to break down the old surface sealer. I followed this by using a wet-vac machine to remove any soiled residue. As you can see in the next photograph, the colours are already starting to show.

Grout Haze Removal from Sandstone Wappenham

Treating Grout Haze on Sandstone

The next photo shows the second stage of the process, which involved the application of a new product in the Tile Doctor range called Acid Gel. The acid based formula is required to remove the cement/grout and being a gel you find the product remains in situ breaking down the grout haze instead of spreading around as you would expect with a liquid.

Grout Haze Removal from Sandstone Wappenham
I left the Acid Gel to dwell for approximately ten minutes, before mixing it with water and scrubbing it into the tiles with an industrial brush. This was followed by a second wet vacuum to ensure all the residue was removed. A turbo dryer was used on the treated area to speed up the drying process whilst I moved onto the next section.

Grout Haze Removal from Sandstone Wappenham Grout Haze Removal from Sandstone Wappenham

Sealing Sandstone Floor Tiles

Once the floor was fully dry I was able to seal it again with a couple of coats of Tile Doctor Colour Grow. Sealing will protect the floor from staining and make it easier to clean, additionally Colour Grow soaks into the pores of the stone protecting it from within and enhancing the natural colours of the stone in the process.

Grout Haze Removal from Sandstone Wappenham
The final photograph shows an area which has been fully sealed and the tiles restored to their natural beauty. I achieved this result across the entirety of the floor.

Grout Haze removed from a Sandstone tiled floor in Northamptonshire

Sandstone Tiled Floor Treated For Grout Haze in Wappenham Read More »

Red Quarry Tiles Stripped and Sealed Abington

Red Quarry Tiled Floor Restored in Abington

Here’s an interesting work I recently completed on a red Quarry tiled floor at a house in the town of Abington, Northampton. In post-war Britain (more specifically in the 1940s and 1950s), many new homes were built with Quarry tiled hallways and kitchens, so quite a popular feature back then. These floors are typically quite hard wearing and therefore ideal for such high traffic areas; additionally they don’t need a great deal of maintenance but their appearance will degrade over time.

Red Quarry Tiles Before Cleaning and Repair Abington
In this particular house, the Quarry tiled floor had been covered with linoleum for many years, causing significant patches of visible black mould. The floor also had a loose tile (which I promptly reset to mitigate the potential tripping hazard) and splashes of paint due to a lack of precaution while the house was being renovated. Needless to say, the floor needed a lot of work.

Cleaning a Red Quarry Tiled Floor

Before beginning the cleaning I made sure to vacuum up all of the loose debris from the floor. I then applied Tile Doctor Remove & Go to the tiles, left it to dwell for a short period, and then agitated the area with a black stripping pad, adding water to aid the process. This helped to break down any old and ineffectual sealer, along with the paint splashes marking the tiles, leaving a much cleaner and more refined appearance.

Red Quarry Tiles After Cleaning and Repair Abington
I followed this up with Tile Doctor Grout Clean-Up to eliminate the odd speck of cement and grout haze dating back to when the floor was first installed; Gout Clean-up has an acid base so it’s not advised to leave it on the tiles for too long, consequently as soon as I was happy it had done the job I rinsed it off with water and give the floor a thorough wash down.

I used a wet-vacuum machine to extract as much water as possible and gave the floor a once over with steam cleaner which improves the evaporation of any remaining moisture by heating up the tiles.

Red Quarry Tiles Stripped after cleaning Abington

Sealing a Red Quarry Tiled Floor

After completing the cleaning process, I left the house to allow time for the floor to dry completely. Upon my return, I conducted a damp test which showed the floor needed to dry further before sealing so I left an industrial fan in place for a couple of hours to help speed things up.

Once I was satisfied that the floor was dry enough to take the sealant, I sealed the floor using Tile Doctor Colour Grow which is an interesting product that will not only provide durable stain protection but also improves the natural colours of the tile.

Red Quarry Tiles Stripped and Sealed Abington
While the floor required a lot of time and work to restore, I think you will agree the results were certainly worth waiting for.

Quarry tiles repaired, cleaning and sealed in Northamptonshire

Red Quarry Tiled Floor Restored in Abington Read More »

Flagstone Sitting Room Grafton Underwood After Cleaning

Stripping and Resealing a Flagstone Tiled Living Room in Grafton Underwood

This property was situated in the tiny, yet picturesque village of Grafton Underwood in Kettering, Northamptonshire. The village has only a population numbering a few hundred and, interestingly enough, is the childhood home of the famous ‘Bridget Jones’ character. I have previously worked on a number of floors in Grafton Underwood, and on this particular occasion I was called to complete the job through a recommendation – which is always welcome!

This particular customer had two floors that needed re-finishing; the first was a polished Limestone tiled conservatory (which I will cover in a separate post as the process was different) and the second a Flagstone tiled living room; so on a rather dull day in November, I began my work.

Stripping a Flagstone tiled floor

The sealer on the Flagstone tiled living room had failed in certain places, resulting in the floor becoming difficult to clean due to dirt becoming ingrained in the stone. The decline in the sealer is not uncommon, as they do wear down over time – especially in an area of high traffic like a living room. To resolve this issue, the old surface seal needed to be stripped back and re-sealed.

Flagstone Sitting Room Grafton Underwood Before Cleaning
To remove what was left of the old sealer, I applied a dilution of Tile Doctor Remove and Go and scrubbed it into the floor using a rotary machine fitted with black stripping pads. I then gave the floor an initial rinse, before paying special attention to scrubbing the stubborn spots, making sure all of the sealer was removed.

I then gave the floor an acid wash using Tile Doctor Grout Clean-Up in order to remove grout haze and other mineral deposits which were evident. Due to its acidic properties, you have to be very careful with this product on any type of stone, so I didn’t let it dwell for too long and made sure the floor was thoroughly rinsed down afterwards, with all solutions extracted using a wet-vac machine.

Sealing a Flagstone tiled floor

The floor was left to dry for more than 24 hours, before I returned to re-seal it using Tile Doctor Seal & Go. This product provides both a stain resistant surface seal and the durable low-sheen finish requested by my client. Seal & Go is suitable for use on internal unsealed, porous surfaces.

Flagstone Sitting Room Grafton Underwood After Cleaning
I guess the photographs don’t really do the transformation justice however the freshly re-sealed Flagstone living room certainly brightened up what was a very dreary autumn day!

Flagstone Floor Maintenance in Northamptonshire

Stripping and Resealing a Flagstone Tiled Living Room in Grafton Underwood Read More »

Travertine Tiled Kitchen with Stained Grout Northampton

Travertine Tiled Kitchen With Badly Stained Grout Cleaned in Northampton

Earlier this month I was in the town of Northampton, to see a client who had reported a problem with her Travertine kitchen tiles. Basically the grout between the tiles was badly stained, to the point of appearing almost black.

Travertine Tiled Kitchen with Stained Grout Northampton
The Travertine tiles were also in need of some maintenance, and so I was commissioned to provide a clean, polish and a fresh seal. Travertine is a popular choice for kitchen flooring due to its relatively high durability and distinct features. My task was to get this floor back to looking its best.

Cleaning badly stained grout

My priority was to address the badly stained grout so I cleaned the grout lines by hand using a combination of hand brushes and Tile Doctor Grout Clean-Up. The surface was pre-wet with water, before a solution of Grout-Clean Up and clean water was applied to the surface. The brushes were then used to agitate the solution. Grout Clean-Up contains a mix of concentrated phosphoric acid and cleaner designed to penetrate below the surface of the grout to remove grout stains, smears and mineral deposits.

As you can see from the photos, Grout Clean-Up made an immediate difference to the appearance of the tiles. This product is suitable for use on masonry and acid resistant surfaces. After completing the clean, I gave the floor a thorough rinse to neutralise the floor after cleaning and removed as much of the water as possible using a wet vacuum.

Travertine Tiled Kitchen with Stained Grout Northampton

Burnishing Travertine tiles

Following this, I paid attention to the tiles themselves, cleaning them to achieve a polished effect by using a system of burnishing pads. Tile Doctor burnishing pads comprise a set of four pads varying in grit type, from Coarse and Medium to Fine and Very Fine. I applied all four pads in turn to the floor, stopping to rinse the floor in between each. The result was a high quality polished finish.

I then left the floor to dry completely overnight, before commencing the seal the next day. My choice of sealing product was Tile Doctor Colour Grow which is a colour intensifying sealer that both enhances the natural appearance of the stone and provides a durable surface seal.

Travertine Tiled Kitchen with Stained Grout Northampton
My client was very pleased with the finished product, and left the following comment on the Tile Doctor feedback system: “efficiently done”, yielding “good results”.

Dealing with Stained Grout in a Travertine tiled kitchen in Northamptonshire

Travertine Tiled Kitchen With Badly Stained Grout Cleaned in Northampton Read More »

Stained Travertine Hallway Oundle After Cleaning

Renovating A Badly Stained And Hole-Marked Travertine Tiled Floor In Oundle

I recently completed quite a substantial cleaning job at a house in the small, historic market town of Oundle, Northamptonshire. My client had a badly stained Travertine tiled floor that ran throughout her hallway, kitchen, utility area, and toilet.

Travertine is a fantastic choice for tiled floors because it has distinct features which no other stone can offer. It’s not surprising, then, that is popularly used for both residential and commercial flooring. In this case however the appearance of the tiles had been further spoiled by dozens of holes, and my client had attempted to remedy this problem by filling some of the holes with concrete. This had left the floor looking inconsistent and certainly worse for wear.

Stained Travertine Kitchen Oundle Before Cleaning Stained Travertine Hallway Oundle Before Cleaning

Cleaning a stained Travertine tiled floor

On day one, my first job was to address the holes marked the tiled surface. I filled the unsealed holes with matching filler, before re-colouring the concrete that had been previously used as a makeshift sealer, thus creating greater consistency in the appearance of the floor.

Following this, I made a strong dilution of Tile Doctor Pro-Clean, which is a high alkaline cleaner which is safe to use on stone, in order to tackle the bad staining on the tiles and grout lines. Once applied to the floor, the solution was left to dwell for a short period of time. By allowing the solution to sit like this, the cleaner is able to seep into the stone, get underneath the dirt and stains, and lift them to the surface. Pro-Clean is highly effective at treating stained tiles, while common acid-based, household cleaning products can cause further damage over time.

To remove the resulting muck from the surface I used a set of Tile Doctor Burnishing pads applying them individually to each tile in sequence from Coarse to Fine, rinsing the floor in-between each pad and removing the resulting residue using a wet-vac machine. The pads are encrusted with diamonds and are ideal for bringing back the finish of Travertine and did a great job of making the filled holes look part of the original floor.

Stained Travertine Kitchen Oundle After Cleaning

Sealing a Travertine tiled floor

After leaving the floor to dry overnight, I returned to the house to seal the newly cleaned tiles. I did this using Tile Doctor Colour Grow, a colour intensifying sealer that also provides a durable surface seal and pleasing finish (as you can see from the photographs).

Overall the job took roughly two days of work to complete and my client was extremely pleased with the results and even left the following comment on the Tile Doctor feedback system:

“Phil was reliable and very professional. Written quote provided detailing in exact detail the work to be done and the products to be used. It was a large area that needed to be treated. Arrived on time and got the job done in good time. Certainly recommend Phil”.

Stained Travertine Hallway Oundle After Cleaning
 

Stained Travertine tiled floor restoration in Northamptonshire

Renovating A Badly Stained And Hole-Marked Travertine Tiled Floor In Oundle Read More »

Victorian Floor After Repairs in Wellingborough

Victorian Tiled Floor Repaired and Cleaned in Wellingborough

I was recently called down to a client’s house in the market town of Wellingborough, situated approximately 11 miles from Northampton. My client’s situation was an interesting one, as she had an old gas pipe sticking out of her Victorian tiled floor, very close to a doorway. Not only was this a bit of an eyesore, it was also significant trip hazard. The floor had been previously covered by carpet, so it is understandable that my client would have been initially unaware of the obstructive gas pipe.

Victorian Floor Before Repairs in Wellingborough
Rather than risking an accident in the future, she asked me to see what I could do to rectify the issue. At the same time, I was commissioned to give the floor a much needed clean and re-seal.

Repairing a Victorian tiled floor

My first priority was, of course, to deal with the exposed gas pipe. I was unsure whether the pipe was live or not, so I carefully removed the surrounding tiles, allowing a certified engineer access to it. He ensured that the pipe was capped below the tile line, allowing me to safely proceed with my repairs.

Victorian Floor Before Repairs in Wellingborough
I returned a few days later, rescreened the area, and began to refit the tiles, carefully hand painting some of the black tiles to hide the damage and cracks. I also applied new grout to fix all of the replaced tiles into position, and this was left to set overnight.

Victorian Floor After Repairs in Wellingborough

Cleaning and sealing a Victorian tiled floor

Returning to the house the next day, I set about treating the floor to a normal strip, clean and re-seal of the entire floor. There was very little old sealer still remaining on the tiles, so I mixed a solution of Tile Doctor Pro Clean and water, before applying this to the floor. Pro Clean is a strong alkaline cleaner which also contains stripping properties, allowing it to both clean and break down any old sealer. The solution was worked into the tiles using a black scrubbing pad, and any excess residue was quickly absorbed using a wet-vac machine.

Sealing Victorian Floor Tiles

With older floors you never can tell if a damp proof membrane was installed and it can be troublesome applying a sealant to a damp floor so I left the whole floor to dry for seven days, giving it more than sufficient time to dry completely before the re-seal. To seal the tiles I used five coats of Tile Doctor Seal & Go Extra, which provides both a robust surface seal and the pleasing sheen finish requested by my client; Seal and Go Extra is especially suitable for exterior applications or damp floors due to its increased breathability.

My client was very glad to see the back of the gas pipe and pleased with the overall results of the clean and seal, as it had given this Victorian tiled floor – once hidden under carpet – new life and character. Additionally I’m sure that restoring such an original feature for the property has increased its value.

Victorian Floor After Repairs in Wellingborough
 

Restoring Victorian floor tiles in Northamptonshire

Victorian Tiled Floor Repaired and Cleaned in Wellingborough Read More »

Old Quarry tiled floor after restoration Hackleton

Quarry Tiled Hallway Cleaned and Restored in Hackleton

This was a restoration I did for a couple living in Hackleton, Northampton, who had just moved into their new home and wanted their recently discovered Quarry tiled hallway fully restored before their housewarming party.

Old Quarry tiled floor before restoration Hackleton
The couple had lifted up the carpet upon moving into the house to find a dirty and damaged floor beneath. It had been marked with glue around the edges where the carpet gripper rods had been stuck down upon installation. My clients had attempted to remove the unsightly glue marks themselves using a chisel and hammer. Unfortunately, the DIY job actually caused further damage to one tile, leading to the couple seeking the services of a professional to complete the job properly. It was especially important to have the floor ready quickly, as there was only ten days to go before the housewarming party.

Old Quarry tiled floor before restoration Hackleton

Stripping and cleaning a Quarry tiled hallway

After providing the couple with a quote, I began working on the hallway. My first task was strip the Quarry tiles of the old sealer using a combination of black stripping pads and Tile Doctor Remove & Go, a multi-purpose product which contains both strpping and cleaning properties. Remove & Go was left to soak into the tiles before being scrubbed into the floor using a rotary scrubbing machine. After successfully breaking down the layers of old sealer, I rinsed the floor using clean water and soaked up the residue with a wet-vac machine.

Old Quarry tiled floor before restoration Hackleton
The next stage of the job involved removing the old glue marks by hand from around the edges of the hallway. This was painstaking work in which I utilised both a scraper and a hand brush to carefully rid the tiles of these blemishes. Working in small, two metre sections of the floor, I then applied a second coat of Remove & Go, allowed it to soak into the area for a further ten minutes, and then rinsed it with clean water. During my inspection of the floor I also noticed a few splashes of paint, which I duly removed by hand.

Sealing a Quarry tiled hallway

Due to the pressure on time leading up to the housewarming party, I needed to speed up the drying process. I did this by installing a dehumidifier and a turbo fan. The floor was then left to dry for more than 24 hours before I returned to complete the sealing.

Upon my return I took damp meter readings in order to determine which sealer would be the best to use. I resolved to use Tile Doctor Colour Grow, an impregnating sealer which is fully breathable, allowing dampness to escape from this type of tile. This is important, as the tiles had been first installed many years ago with no damp proof membrane. As the sealer dried it provided the floor with a nice, light sheen. Since Colour Grow is also specially designed for colour intensification, the fantastic natural shades and colours in the Quarry were really brought to life again.

Old Quarry tiled floor after restoration Hackleton Old Quarry tiled floor after restoration Hackleton

My clients were extremely pleased with the results, with the prompt and efficient service ensuring that the job was completed in good time for their housewarming party.

Old Quarry tiled floor after restoration Hackleton
 

Restoring a Quarry Tiled Hallway in time for a Party in Northamptonshire

Quarry Tiled Hallway Cleaned and Restored in Hackleton Read More »

Victorian Hallway Tiles Builder Cleaning after in Northampton

Refurbishing a Victorian Tiled Hallway in Northampton After Building

This customer asked me to pay a visit following work to refurbish the house and wanted to restore as many original features as possible; work had been going on to restore coving, picture rails, ceiling roses and fireplaces but unfortunately nobody had thought to cover up the beautiful Victorian floor. When I arrived there was plaster dust and splashes of paint all over the floor that needed attention. A quote was given which was accepted and the work was booked in for the following week.

Victorian Hallway Tiles Builder Cleaning before in Northampton Victorian Hallway Tiles Builder Cleaning before in Northampton

Cleaning Victorian Quarry Tiles

My first course of action was to vacuum the floor to remove any loose debris so I could assess how to proceed. I then applied diluted Tile Doctor Pro Clean with a pump up sprayer and left it to dwell on the tiles for fifteen minutes before working it in with a black scrubbing pad and hand brushes. The now soiled cleaning solution was then rinsed off together with most of the plaster and surface dirt which had come away in the process. I was then left with a few paint splatters which I removed by spot treating by hand with Tile Doctor Remove and Go; it became clear at this stage that the Pro-Clean had not removed all the old sealer and so I decided to spray the whole floor with a dilution of Remove and Go and work it in with brushes, the solution was left for a further ten minutes and then rinsed away with an extraction machine.

Sealing Victorian Quarry Tiles

The floor was left alone to dry for several days with a fan on site to assist the process. The customer wanted the floor to look traditional and requested a matt finish so when I returned to site two coats of Tile Doctor Matt Colour Grow Sealer was applied. Colour Grow is breathable and will allow any damp to evaporate without disrupting the finish, this is important as floors of this age were laid without any damp proof course or membrane which can sometimes result in damp issues.

Victorian Hallway Tiles Builder Cleaning after in Northampton Victorian Hallway Tiles Builder Cleaning after in Northampton

 

Victorian Tiled floor Restored after Building works in Northamptonshire

Refurbishing a Victorian Tiled Hallway in Northampton After Building Read More »

Black and Red Victorian Quarry Tiles After Cleaning Rushden

Restoring a Victorian Quarry Tiled Kitchen Floor in Rushden

A customer called me out to take a look at restoring the Red and Black Victorian Quarry tiles floor they had discovered under linoleum In the kitchen of their house in the town of Rushden.

I carried out a patch test to see which products would have the best results and although most of the old sealants had worn of over time there was still glue from the lino and patches of sealer that would have to be dealt with. A quote was given and accepted and the work was booked in to the customer’s convenience.

Black and Red Victorian Quarry Tiles Before Cleaning Rushden

Cleaning Victorian Quarry Tiles

After vacuuming and mopping the floor I decided my best course of action would be to spray Tile Doctor Remove and Go to 25% of the area, this was then scrubbed in by machine using a black stripping pad. This area was then rinsed off with an extraction machine and the process repeated over the rest of the floor. I then inspected the floor and noticed a few shiny patches where the sealant hadn’t been fully removed so I then tackled these stubborn areas by hand with a second application of Remove & Go. A final rinse to the whole floor was given to make sure no trace of cleaning product remained before sealing.

As much water as possible was removed using the extraction machine and a dehumidifier installed and left for seven days to assist the drying process.

Sealing Victorian Quarry Tiles

On my return I confirmed the floor had dried thoroughly by taking took damp meter readings in different parts of the floor. All was well and so I proceeded to seal the tiles using multiple coats of Tile Doctor Seal and Go which matched the customers’ requirements of gloss finish.

Black and Red Victorian Quarry Tiles After Cleaning Rushden
As the pictures show there was a vast improvement in the floor and the customer was very pleased with the results. They were also given information on maintenance of this type of floor to keep it looking its best for years to come.

Victorian Quarry Tile hidden under Lino Restored in Northamptonshire

Restoring a Victorian Quarry Tiled Kitchen Floor in Rushden Read More »

Cleaning Grout Ceramic Tiles in Rushden After

Grout Cleaning Difficulty in a Rushden Kitchen

This customer from Rushden called me in because she was having difficulty keeping the grout in her kitchen clean although the ceramic tiles themselves were fairly easy to maintain.

On speaking to the customer it became evident that the one coat of sealant that was originally applied to the grout five years ago had all but worn off and the cleaning products she was using were too strong reducing the life of the sealer and now dirty water getting into the now porous grout which was causing staining each time she mopped the floor.

Cleaning Grout Ceramic Tiles in Rushden Before
I gave the customer a quote for deep cleaning and extraction of tiles and grout lines, as they were thinking of selling the house they didn’t want to have the expense of re-colouring the grout. We decided the best course of action would be re-sealing the grout with Tile Doctor Grout Seal & Go after cleaning and this should protect it going forward.

Deep Cleaning Ceramic Tile and Grout

To get the grout clean and lift out the dirt we used Tile Doctor Pro-Clean mopped onto the floor and scrubbed into the grout lines with a stiff grout brush. The second and third pictures below show the equipment we use to deep clean and scrub the grout and to extract the water under pressure to clean the grout as best as possible.

Cleaning Grout Ceramic Tiles in Rushden During Cleaning Grout Ceramic Tiles in Rushden During

Sealing Grout

The final pictures below show the overall end result after allowing the floor to drying overnight and then sealing the grout with two coats of Tile Doctor Grout Seal & Go.

Cleaning Grout Ceramic Tiles in Rushden After Cleaning Grout Ceramic Tiles in Rushden After

I also talked the customer through Tile Doctor recommended cleaning procedures and advised her that she was entitled to a free bottle of Tile Doctor Neutral Cleaner which would keep the floor looking at its best for much longer and would not affect the grout sealant.

Cleaning Ceramic Tile and Grout and Sealing in Northamptonshire

Grout Cleaning Difficulty in a Rushden Kitchen Read More »

Black Marble in Brackley During Polishing

Putting the shine back on a Black Marble Floor in Brackley

This customer from the town of Brackley near Northampton got in touch with us to discuss their lovely black Marble tiled floor where it was proving difficult to maintain the shine. I went to visit and after carrying out some tests and asking a number of questions it became clear that that the product that had been used for regular cleaning had a high alkaline detergent content which was not suitable for the floor and had been causing smears, there were also light scratches due to the soiling levels. For polished stone or sealed floors we always recommend a neutral PH cleaning product such a Tile Doctor Neutral Cleaner.

Black Marble in Brackley Before Polishing

Burnishing Polished Black Marble Tiles

To remove the light scratches and restore the shine on the Marble it was necessary to cut back the surface and re-polish with a set of burnishing pads. The pads come in a set of four and are applied in sequence starting with a coarse pad together with a little water to cut through the old sealer and grime. You then progress through the other finer pads one by one until you get to the final polishing pad which provides a high polish.

Black Marble in Brackley During Polishing

After polishing the floor was rinsed down to remove any slurry from the polishing process and then allowed to dry before sealing with Tile Doctor Colour Grow which impregnates the pores in the stone enhancing the natural colours and protecting it from future staining.

Black Marble in Brackley After Polishing

Before leaving we spoke again on the types of cleaning solutions to get the best results and she was over the moon with the results.

Maintaining Polished Black Marble Tiles in Northamptonshire-

Putting the shine back on a Black Marble Floor in Brackley Read More »

Travertine Tiles After Cleaning Polishing in Northampton

Polished Travertine Tile Maintenanced in Northampton

Polished stone floors such as Travertine need to be regularly maintained correctly or will lose their sheen over time, additionally grout lines can fill with dirt and light scratches can quickly dull down Travertine and attract yet more soil. This was the case with this Travertine tiled floor in Northampton which had been left too long between deep cleans and now the protective sealer had worn off and were badly scratched and soiled.

Travertine Tiles Before Cleaning Polishing in Northampton

Burnishing Polished Travertine Tiles

To get the surface back to a condition where it can be polished again it’s necessary to burnish the Travertine using a set of diamond encrusted floor pads. The pads come in a set of four and you start with the coarse pad which together with a little water cuts through and removes grime and sealers from the tile. This take a bit of time to get around the whole floor and then you rinse it down to remove any slurry and start again with the medium pad which is of a higher grade and is the first step in the polishing process. Again the floor is rinsed before moving on to the third pad which is a fine grade and is the second step in bringing the polish back.

By this time it was getting late so the floor was given another rinse and I came back the next day to apply the final pad in the set of four which is a super fine pad that is run over the floor and puts the final shine on the polished Travertine. The floor was given another rinse and left to dry so it could be sealed later that afternoon.

Sealing Polished Travertine Tiles

There are a number of sealers that you can use on Travertine and in this case I chose Tile Doctor Colour Grow which in an impregnating sealer that occupies the pores in the stone to prevent contaminates lodging there and also does well to bring out the natural colours in the stone.

Travertine Tiles After Cleaning Polishing in Northampton
All in the job took two days and I’m happy to report the customer was very happy with the results.

Cleaning and Polishing Travertine Tiled floor in Northamptonshire

Polished Travertine Tile Maintenanced in Northampton Read More »

Victorian Quarry Tiled Floor Finedon After

Restoring a Victorian Quarry Tiled Hallway in Finedon

The following photos are from a property in Finedon, Wellingborough where like so many of my customers it seems the owner was in the middle of a full property restoration which included plans to bring the original Victorian hallway Quarry tiles back to life. Tile Doctor restores hundreds of Victorian floors across the UK every year so she gave us a call. I came round to take a look at the tiles and could see that the floor had been covered with Linoleum for many years which had been fixed with adhesive we was still evident on the tiles along with old wax based sealers which would need to be stripped off. In general the floor was now looking very dull and uncared for.

Victorian Quarry Tiled Floor Finedon Before

Cleaning Victorian Quarry Tiles

To remove the glue and restore the tiles a dilution of Tile Doctor Remove and Go was left to soak into the pores of the tile for twenty minutes before being brushed in with a rotary machine fitted with a black stripping pad. Once done the floor was rinsed down thoroughly with water and the remaining solution removed with a wet vacuum, this revealed a few areas that needed re-treating so the whole process was repeated until I was happy that the glue and old sealers were gone and the tile and grout was as clean as I could get it. This process took up much of the day and after using the wet vacuum again to get the floor as dry as possible I left a couple of fan dryers in place to assist with the drying.

Sealing Victorian Quarry Tiles

The floor was left for a few days so it could dry out thoroughly and then checked for dampness and remaining staining, the floor was dry but there were a few areas that needed further attention which were spot treated and then dried out with a hand drier. To protect it and make it easier to clean in the future the floor was then sealed by applying a number of coats of Tile Doctor Seal and Gof which added a nice light sheen finish to the look of the tile.

Victorian Quarry Tiled Floor Finedon After
 

Victorian Quarry Tile Restoration in Finedon, Northamptonshire

Restoring a Victorian Quarry Tiled Hallway in Finedon Read More »

Dirty Grout in Titchmarsh Kitchen After Cleaning

Cleaning up newly installed Grout in Titchmarsh

This customer from Titchmarsh near Kettering was unhappy that the Porcelain floor tiles that were installed in her kitchen six months prior were proving difficult to clean and that the grout line had turned from a grey to black and whatever she tried she just could not keep this floor clean. On inspection I soon discovered that no or very little sealer had been applied to the Porcelain which is not unusual as most Porcelain does not require a sealer however Micro Porous Porcelain does and she should have been advised by the shop that sold her the tiles that this was the case. A quote was given which she was happy with and I returned the following week to sort the problem out.

Deep Cleaning Porcelain Tile and Grout

To protect the kitchen units I covered them in a plastic and then moved onto to deep cleaning the tiles with a dilution of Tile doctor Pro Clean which was applied and left to soak in for a while before hand scrubbing the floor on my hands and knees with stiff brushes. This did made an improvement but something stronger was required to get the grout looking better so it was back down to the floor with hand brushes again but this time I used Tile Doctor Grout Clean-Up which is an acid that can remove grout smears and mineral deposits, in the end I actually used two litres of Grout Clean-Up to restore the grout to about 95% of its correct appearance and once done I gave the floor a thorough wash down to remove any trace of product.

Dirty Grout in Titchmarsh Kitchen During Cleaning

Sealing Porcelain Tile and Grout

This grout should have been correctly sealed from day one and luckily for the client it came up to her satisfaction otherwise the only other option would have been to use a Grout Colourant which would have been more costly but cheaper than replacing the grout altogether. Had the grout been much older this may have been the best option as I suspect the result from cleaning would have been less effective. The last step was to seal the tiles and grout using Tile Doctor Ultra Seal which is a natural look sealer that provides maximum stain protection and is recommended for use in kitchens. Before leaving I gave the client written instructions on maintenance which she found very helpful.

Dirty Grout in Titchmarsh Kitchen After Cleaning
 

Cleaning and Sealing Porcelain Tile and Grout in a Northamptonshire Kitchen

Cleaning up newly installed Grout in Titchmarsh Read More »

Swimming Pool Tile Cleaning Naseby

Removing Rust Stains from Anti-Slip Swimming Pool tiles in Naseby

The photographs below were taken at a privately owned swimming pool in the historic village of Naseby an area famous for the civil war battle that tool place there in 1645. The pool was surrounded by Anti-Slip safety tiles which have a roughened texture to improve traction around the water’s edge, this does have the side effect however that they trap dirt more easily. The tiles were overdue a deep clean and had become very dirty and additionally there were rust marks from metal furniture and blackish grout lines.

Rust Stains on Swimming Pool Tile Cleaning Naseby

Cleaning Pool Tiles and Removing Rust Stains

Working one area at a time and taking care not to contaminate the swimming pool a dilution of Tile Doctor Pro-Clean was applied to the tiles and then worked into the tile, especially the rust stains before being washed off using a Rotovac machine which applies hot water at high pressure and then removes it to a remove tank using suction. It’s an ideal machine for this sort of job as it’s very self-contained.

Stubborn areas were treated with Tile Doctor Remove and Go which is a powerful product designed to deal with sealers and other surface coatings. Once done another rinse with the Rotovac ensured the soiled cleaning solution and any trace of cleaning product is removed from the surface.

Rust Stains on Swimming Pool Tile Cleaning Naseby

Sealing Ant-Slip Porcelain tiles

Once the tile and grout was clean it was left to dry so it could be sealed which will prevent the tile and grout becoming dirty so quickly. For this we used Tile Doctor Pro-Seal which is a no-sheen, natural look, water based penetrating sealer.

Swimming Pool Tile Cleaning Naseby
It makes a significant difference if you have the right tools for the job and this resulted in the tiles looking as good as new in no time.

Deep cleaning pool surround tiles in Naseby, Northampton

Removing Rust Stains from Anti-Slip Swimming Pool tiles in Naseby Read More »

Scroll to Top