polishing Archives - Northamptonshire Tile Doctor

Pale Marble Floor Clean Seal Old Village

Grout Cleaning and Polishing a Marble Tiled Floor in Old Village

Last year I was called to look at Polished Marble floor at a house in the small village of Old in Northamptonshire which is situated between Kettering and Northampton. The Marble floor was reasonably large at 25m2, and the main problem was the Marble had lost most of its shine, becoming dull and lifeless over time, additionally the grout which was once white had darkened with ground in dirt,

Marble Tiled Floor Before Grout Cleaning and Polishing

If you want the look of a highly polished floor then it will need regular polishing to keep its appearance, in fact Tile Doctor provide a “Maintenance Plan” service for this purpose. How often you need a repolish really depends on how much the floor is used and for a busy high traffic area such as this kitchen diner it may be necessary to have two visits a year.

In this case the Marble needed a lot more than a repolish, my client was unhappy with the stained grout lines and the tiles really needed stripping and resealing to bring the colour back to somewhere near its original. After surveying the floor, I was able to confirm what needed to be done and gave them a price for the work which they were happy to accept.

Cleaning and Polishing a Marble Tiled Kitchen Diner Floor

To get the grout clean and give remove grit etc from the floor before polishing I gave it an initial clean using a medium dilution of Tile Doctor Pro-Clean. This is a professional Tile and Grout cleaning product which is applied to the grout, left to soak in for ten minutes and then scrubbed into the grout line by hand. The soil is then rinsed off with water and then extracted with a wet vacuum.

To bring up the polished appearance of the Marble tiles I used a set of four 17” diamond encrusted burnishing pads which have different levels of grit. The pads are applied to the Marble tiles in sequence using a floor buffer and a small amount of water for lubrication. I started with a coarse pad, before moving on to a medium pad, then a fine pad on the first day, working in small sections of around 4 – 5sqm. The floor is given a thorough rinse between each pad to remove any excess residue generated from the burnishing process. The soil was then extracted using a wet vacuum to keep the mess to a minimum.

Sealing a Marble Tiled Kitchen Diner Floor

The floor was left to dry overnight, and I returned the next day. I carried on the process using the very fine burnishing pad to achieve a high shine finish. This pad is applied dry to the floor using only a little water sprayed onto the tile. It brings up the final polish on the tiles and leaves the floor dry so it can be sealed afterwards.

To seal I applied a single coat of Tile Doctor Ultra-Seal which is a premium impregnating sealer that soaks into the pores of the stone protecting it from within. It’s a natural look sealer and by this, I mean it doesn’t alter the natural look of the stone and is almost invisible. The area was dried with a fan for one hour and then I checked the performance of the sealer by carrying out a water repellence test. The result of this test will let me know if a second coat of sealer may be needed.

Marble Tiled Floor After Grout Cleaning and Polishing

Once complete the grout was white again and the Marble tiles had a deep shine to them. My client was very happy with the results of my work and took the time to leave the following comment on the Tile Doctor feedback system.

Marble Polishing and Grout Cleaning Testimonial Old Village

For aftercare cleaning I recommended Tile Doctor Stone Soap which will keep the floor clean and help maintain the lustre. I also I let them know about our maintenance program which involves popping back for a couple of hours once a year to give the floor a polish with a very fine 3000-grit burnishing pad and top up the sealer.

Professional Restoration of a Marble Tiled Floor in Northampton

Grout Cleaning and Polishing a Marble Tiled Floor in Old Village Read More »

Polished Limestone Tiles Burnished and Restored Near Oundle

Limestone is known on the international market to be a stone of premium quality, durability and toughness, and Limestone tiles give any property a high-end wow factor when they are looking their best. To maintain that appearance however does require some work and this is where Tile Doctor is happy to assist.

This Polished Limestone tiled floor had been installed four years prior in the kitchen and living room of a house in Ashton Village, near Oundle in Northamptonshire. The tiles had lost their shine and the grout had become dirty and stained and the floor in general was proving to be increasingly difficult to clean.

Polished Limestone Floor Before Cleaning Ashton Village

This is a common problem with polished stone floors, the surface polish and sealer wear down over time allowing dirt to penetrate. At a loss with what to do to restore the appearance of the floor, the property owner called me in to give the Limestone a professional-level clean, seal and polish.

Burnishing and Cleaning Polished Limestone Tiles

With tiles made of Limestone, Travertine, Marble and other high quality polished stone, we find that the best way to restore appearance is through a process known as burnishing.

Our burnishing system involves the application of four different diamond encrusted pads. Working in small sections of between four and six square metres, I applied the first pad, which uses a coarse grit to remove light scratches and dirt, followed by a pad with a medium grit pad to prepare the floor for polishing. Next, I used the third pad with a fine grit to start the polishing process.

Before moving on to the fourth and final pad, I cleaned the grout lines using handheld brushes in combination with Tile Doctor Pro-Clean, which is a high alkaline tile and grout cleaner that is safe to use on tiled floor. The floor was rinsed and the soiled cleaning solution extracted using a wet vacuum.

Sealing Polished Limestone Tiles

Following this, I allowed the floor to dry completely overnight. Upon my return to the property the next day, I used the fourth pad, which uses a Very Fine grit is to give the stone a high shine finish.

The floor was then ready to be sealed with Tile Doctor Ultra Seal, which is a premium, natural look, impregnating sealer designed to provide maximum stain protection. This was allowed to dry for an hour, before I then re-polished the tiles to remove any excess sealer and to refine the finish the absolute best quality possible.

Polished Limestone Floor Ater Cleaning Ashton Village

The benefit of the burnishing pad system is that no chemicals are used (just a small amount of water for lubricant) so it is environmentally-friendly. I recommend the customer to use Tile Doctor Neutral Cleaner in the future to provide quick and effective maintenance. She was very pleased with the results and now she will be well-equipped to keep the floor in fantastic shape.

polishing