These Noche Marble tiles installed in the hallway of this house in Oundle are a premium product with a warm antique look however like any natural stone tile it needs to be sealed in order to prevent dirt becoming ingrained in the pores of the stone. In this case the sealer had worn off and was the floor was now difficult to keep clean so we were called into the deep clean the tile and grout and then re-seal. Sealers can last a few years depending on wear.
Cleaning Noche Marble Tiles
To deep clean the tile and grout and remove any remaining sealer I combined a strong dilution of Tile Doctor Pro-Clean 50/50 with NanoTech UltraClean. The UltraClean adds tiny abrasive particles which make a more effective cleaning product, both products are safe to use on natural stone floors. It’s best to let the solution soak into the tile for ten to twenty minutes before being scrubbed in with a rotary machine fitted with a scrubbing brush or black scrubbing pad. The rotary pads can struggle to get into the grout lines so it’s best to use a stiff brush along those.
To remove the soiled cleaning solution and rinse the tiles I use a high pressure spinner tool which is a brilliant machine for tile cleaning as it deploys water under high pressure water whilst extracting the dirty water back to a container in the van.
Sealing Noche Marble Tiles
The floor was left to dry out for a few days and we returned the following week to seal the tiles using a damp meter first to verify the floor was indeed dry which it was so we proceeded to seal the tiles using two coats of Tile Doctor Colour Grow.
Colour grow was chosen as it’s an impregnating sealer the soaks into the pores of the tile bringing out and enhancing the natural colours in the stone in the process.
I took lots of photographs so you should be able to see how much cleaner the floor now looks, especially the grout and how the colour has been restored to the Marble.
Noche Marble Floor Tiles Cleaned and Sealed in Northamptonshire
The photograph below is from a Victorian tiled hallway floor that we were asked to restore in the historic town of Towcester, Northamptonshire; the owner wanted the tiles restored as an original feature. You can see from the photograph below how dull and neglected the tiles were so we had our work cut out.
Cleaning Victorian Tiles
We set about cleaning the tile using Tile Doctor Pro-Clean which is a powerful alkaline cleaning product that is safe to use on tile and stone. It was applied with a mop and left it to dwell on the floor for ten minutes first in order to give it chance to soak into the tile and get to work on the dirt. It was then worked into the floor using a rotary machine fitted with a black scrubbing pad, stiff hand brushes were used in difficult to get to places and along the grout lines requiring a substantial amount of elbow grease. The soiled water was picked up with a wet and dry vacuum and the floor was rinsed with clean water so we could see the result.
Unfortunately there were a number of stubborn areas and a stronger product was needed to shift them so we applied a dilution of Tile Doctor Remove and Go which is a coating remover that can shift most issues, again this was applied and left to dwell for a while before working it into the stubborn stains using hand brushes. The dirty solution was removed again using the wet and dry vacuum and we could see the tiles were now clean so the floor was given a thorough rinse several times with fresh water to remove any leftover chemical and then left to dry overnight.
Sealing Victorian Tiles
The next day the floor had dried so we were able to seal it using four coats of Tile Doctor Seal and Go which adds a nice shine to the floor as well as providing a surface seal that will help protect the tile from stains going forward.
A lot of effort but what a transformation and well worth the work that went into it as you can see from the photograph above.