Polishing Travertine Archives - Northamptonshire Tile Doctor

Travertine Tiled Hallway and Kitchen Floor Renovated Welton Daventry

Dirty Tumbled Travertine Floor Renovated in Welton near Daventry

1 Comment / Daventry Tile Cleaning, Travertine Tile Cleaning, Work by Category, Work by Location, Work History / Philip Vissian / Burnishing Pads, Daventry, Honed Stone, Kitchen Floor, northamptonshire, Polishing Travertine, Pro-Clean, Sealing Travertine, Stone Soap, tile cleaning, Travertine Renovation, Tumbled Travertine, Ultra-Seal, welton

This is a Tumbled Travertine floor with a Honed finish that was installed some years prior in the hallway and kitchen of a house in the village of Welton near Daventry. Kitchens and hallways have the highest foot traffic of any room in a house and without regular maintenance the sealer started to wear down allowing dirt and staining to reach the pores of the tile and grout lines. Travertine is known for its small depressions known as pitting and without the protection of the sealer those areas became heavily soiled. The grout had also darkened with ingrained dirt turning what was a light grey colour into a contrasting black.

Tumbled Honed Travertine Welton Before Cleaning

After visiting the property and surveying the floor I recommended burnishing the floor with a set of abrasive pads to remove the dirt and then resealing with a more durable product. To prove my point, I ran a small test clean on the floor so they could see the potential difference this could make. Happy with the result they asked for a quote which was accepted, and the job was booked in.

Cleaning a Tumbled Travertine Tiled Kitchen Floor

I started the cleaning process by sweeping and vacuuming the floor to remove any grit and other debris. Then it was cleaned with a 3:1 dilution of Tile Doctor Pro-Clean, spraying it onto the floor and allowing it to dwell and make a start breaking down the soiling. The product was then worked into the floor using a stiff brush paying particular attention to the pitted areas and along the grout lines to get them clean. This was followed by rinsing the floor with more water and extracting the soiling with a wet pick-up machine.

The next step was to use the burnishing pad system starting with the coarse pad fitted to a rotary machine and worked into the tiles with a small amount of water for lubrication. The set of pads come in various grits and are actually made from industrial diamonds.

This first 400-grit pad cleans the tiles and removes any remaining sealant that may have been present on the tiles. This was continued with the finer 800-grit pad, again using nothing but water and then rinsing the floor of any slurry generated by the process after each pad.

When the floor had dried, I applied a fine 1500-grit pad to bring up the polish on the Travertine until it had a silky honed finish. There is a fourth 3000-grit pad in the system that brings up the polish even further to achieve a high shine finish, but my client didn’t want that look.

Tumbled Honed Travertine Welton During Cleaning

Sealing a Tumbled Travertine Tiled Kitchen Floor

To protect the travertine, it was sealed using three coats of Tile Doctor Ultra-Seal sealant which is an impregnating invisible sealer resulting in a very natural finish. Once dry the floor was buffed using a soft white buffing pad.

Tumbled Honed Travertine Welton After Cleaning

You can see from the photos how much cleaner and lighter the Travertine tiles look and that the light grey colour of the grout has been restored. The new sealer will make it much easier to maintain now and with the correct cleaning regime in place the sealer should last a long time. My client was very happy with the work and left the following feedback for me:

“Really happy with our new floor. The service was professional and thorough – definitely worth the money.”

For the regular cleaning of a floor like this I recommend Tile Doctor Stone Soap which is a mild cleaning product that’s designed for use on sealed and polished stone. You must be especially careful when choosing a cleaning product for sealed tiles as many of the products you find in supermarkets are simply too strong and can degrade the sealer prematurely.

Professional Restoration of a Travertine Tiled Floor in Northamptonshire

Dirty Tumbled Travertine Floor Renovated in Welton near Daventry Read More »

Polished Travertine Kitchen Floor Before and After Polishing Abthorpe Towcester

Travertine Floor Tiles Filled and Polished in Abthorpe Near Towcester

1 Comment / Silverstone Tile Cleaning, Travertine Tile Cleaning, Work History / Philip Vissian / Abthorpe, dining room, Filling Travertine, Holes in Travertine, kitchen, northamptonshire, Polishing Travertine, Stone Cleaning, tile cleaning, Towcester, Travertine Floor Polishing

The following pictures show a polished Travertine kitchen and dining room floor at a house in the small village of Abthorpe near Towcester. The stone floor had lost its shine and had become dull and difficult to clean which was mainly due to the holes that had appeared in the surface of the Travertine where dirt had become ground in and trapped. This is a common problem with all Travertine stone, the holes are natural and usually filled at the factory but due to wear and tear over time and the use of acidic cleaning products the filler can become dislodged. The small holes gave the floor an unsightly appearance and become magnets to dirt.

Polished Travertine Kitchen Floor Before Polishing Abthorpe Towcester

We find the best way to restore the shine is to apply a set of diamond encrusted burnishing pads, they take off the layer of dirt and then slowly build a resilient polish on the surface; however, to get the best results we would need to fill the holes in the Travertine.

Burnishing and Cleaning a Travertine Tiled Floor

I gave the floor a sweep to remove any loose dirt and grit and started with the application of the first pad which is a coarse 400-grit and designed to remove minor scratches, old sealers and ingrained dirt. The pads fit a 17” buffer machine and is applied with water to lubricate the process, then once the pad has been applied to each tile the floor is rinsed with water and the resultant slurry is extracted using a wet vacuum.

Before moving onto the second pad in the set I gave the grout lines a clean with Tile Doctor Pro-Clean which was scrubbed into the grout using a stiff narrow brush. The pads can struggle to reach into the recessed grout lines, so I usually find this is the best way to get the grout clean.

Polished Travertine Dining Room Floor Before Polishing Abthorpe Towcester

The floor was given another rinse with water and then I continued to work through the medium 800-grit and then fine 1500-grit pads rinsing with water and then extracting the slurry with a wet vacuum after each pad.

The Travertine was now clean and after drying with fans I commenced the task of filling the holes with stone filler that matched the natural colour of the stone as close as possible, in this case the colour we opted for to achieve the best match was Straw. These activities took up most of the day so once I was done filling I left for the day, so the filler and floor could dry out thoroughly overnight.

Polished Travertine Holes Filled Before Polishing Abthorpe Towcester

Sealing a Travertine Tiled Floor

I returned the following day and started by completing the polishing process by applying the last 3000-grit very fine burnishing pad with the 17” rotary machine, the pad is applied dry with a small amount of water sprayed on the floor as you go along. With the floor now fully dry and the filled holes polished flat the last step was to apply the sealer which will protect the floor going forwards.

Polished Travertine Kitchen Floor After Polishing Abthorpe Towcester

With Travertine floors I usually recommend Tile Doctor Colour Grow which is a colour enhancing sealer or Ultra-Seal which is a natural look sealer. On this occasion the client preferred the natural look, so I applied two coats of Tile Doctor Ultra Seal and along with the previous polishing the floor now look transformed.

Professional Travertine Tiled Floor Restoration in Northamptonshire

Travertine Floor Tiles Filled and Polished in Abthorpe Near Towcester Read More »

Pitted Travertine Before and After Filled Polished Rushden

Pitted Travertine Floor Tiles Filled and Polished in Rushden

1 Comment / Rushden Tile Cleaning, Travertine Tile Cleaning, Work History / Philip Vissian / Bathroom, Filling Travertine, hallway, Holes in Travertine, kitchen, northamptonshire, Pitted Travertine, Polishing Travertine, Rushden, Stone Cleaning, tile cleaning

Not only do we carry out the deep cleaning and restoration of all types of natural stone, we can also carry out repairs such as the filling of holes in stone, whether it be limestone, marble or as in this case Travertine. Travertine in particular is prone to a natural process of erosion know as pitting, this results in holes developing that easily fill up with dirt and muck over time and can be a real problem to maintain.

Pitted Travertine Before Filled Polished Rushden

This customer in Rushden called me in, as he felt the floor hadn’t been properly maintained since it had been installed twelve years prior and he was becoming concerned about the number of holes and pits that were appearing in the high traffic areas. The Travertine tiles had been laid in the hallway, kitchen and upstairs bathroom of the property but the problem was most apparent in the Kitchen.

Burnishing and Cleaning a Travertine Tiled Floor

To get the floors clean and restore the polished appearance of the Travertine I decided to apply a set of Tile Doctor diamond encrusted burnishing pads. The process involves the application of four different pads applied in sequence from coarse to very fine, rinsing in-between each pad to remove dirt. As the floor had been installed in the Kitchen and the Hallway it made sense to split the work into two parts and work on each area separately.

The first pad is a coarse 400 grit pad that is attached to a rotary machine running at slow speed and with only water for lubrication. The pad is applied to the stone to removes minor scratches, sealers and dirt. It’s run over the entire floor and afterwards the floor is rinsed with water which is then extracted with the soil using a wet-vacuum.

I then repeated this same procedure with the second pad, which is a Medium 800 grit pad used to remove dirt from minor scratches and holes in the stone. After rinsing again, I went onto the third burnishing pad in the sequence which is a Fine 1500 grit pad that starts to rebuild the polish on the Travertine. I gave the floor another rinse and used the wet vacuum again to extract the water and soil from the floor. The last 3,000 grit super fine pad was then applied with a small amount of water sprayed onto the floor, this last pad really builds a nice shine on the stone.

Sealing a Travertine Tiled Floor

Once the burnishing process was completed the floor was left to dry off fully overnight and I came back the next day to continue with the work. I took a few moisture readings to confirm the floor was dry and then applied a single coat of Tile Doctor Colour Grow to seal the tiles. Colour Grow is a colour enhancing sealer that impregnates into the pores of the stone protecting it from within and improving the natural colours of the stone in the process. I particularly like to use it on Travertine as it really does bring out the brown shades in the stone.

Filling Holes in a Travertine Tiled Floor

Once the first coat of sealant had dried I started the work to fill the holes throughout the installation using appropriate colours of stone filler resin. I purposely delayed doing this until the first coat of sealer was in place in order to prevent excess resin from being absorbed into the tile and causing unwanted staining. There were quite a few holes to fill so it took a while to complete, the filler also needs several hours to dry and harden even when assisted with a fan. Excess filler is then polished off using a 17” rotary scrubbing machine fitted with a white polishing pad and any dust is carefully vacuumed up before applying a second coat of sealer. The floor was then allowed to dry before a final polish with a new 3000 grit pad to achieve a high sine finish.

Once the cleaning process was complete and the first coat of sealant had dried I then commenced the repair work by filling all holes throughout using appropriate colours of stone filler resin, the first coat of sealant is to stop the excess resin from being absorbed into the tile and causing staining, the filler is allowed to dry and harden for several hours assisted with a fan on site. Excess filler is then polished off using a 17” rotary scrubbing machine and a white buffing pad. Any dust is carefully vacuumed up before applying a second coat of sealant. This is then allowed to dry before a final polish with a new 3000 grit burnishing pad to achieve a deep sine finish.

Pitted Travertine After Filled Polished Rushden

I’m not sure the photographs really show off the transformation that I had managed to achieve, however my customer was certainly happy and left me the following glowing review via the Tile Doctor feedback system.

My hall and kitchen floor has been down for 12 years and has been a high traffic area. The Tile Doctor has literally made it look like new again. Holes filled, smooth, shiny and new again! My fully tiled bathroom has also been rejuvenated, wall tiles, shower tiles and floor tiles. The water now beads on the tiles like a freshly waxed car, and the walk-in shower has been perfectly resealed. Money very well spent.
Thank you so much! Mr.J. White, Rushden

It’s always nice to get feedback like that, it really does make your efforts feel appreciated.

Professional Travertine Tiled Floor Restoration in Northamptonshire

Pitted Travertine Floor Tiles Filled and Polished in Rushden Read More »